Project Administration

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Subsea Christmas Trees, both standard and horizontal are available in current stock and can be shipped worldwide. The subsea x-mas tree is designed for the highest level of reliability with manual rov overrides and retrievable chokes these trees are ready for installation in the most demanding environments. If you require subsea trees, consider the time and cost savings of utilising our existing inventory.

Unleash the Power of Precision: The Newton Grabber by Poseidon Robotics At Poseidon Robotics, we're dedicated to revolutionizing subsea exploration and robotics. Our commitment to innovation has led to the supply of cutting-edge products, and today, we're thrilled to introduce the Newton Grabber, a game-changer in the world of subsea robotics. A Seamless Solution for Enhanced Operations The Newton Grabber is engineered to elevate the capabilities of the BlueROV2 and other subsea vehicles by providing them with the ability to interact with the subsea environment like never before. Whether it's retrieving objects, attaching recovery lines, or freeing a snagged tether, the Newton Gripper delivers unmatched precision and performance, making it an invaluable tool for underwater missions. Intelligent Design: Functionality without Compromise One of the standout features of the Newton Grabber is its intelligent design that seamlessly integrates with your subsea operations. We understand that during certain missions, the grabber might be in the way. To address this, our innovative design allows you to hide the Newton Grabber inside the frame, under the buoyancy. No need for disconnection or removing valuable components; simply tuck it away and continue with your operation without interruption. Versatility at its Best The Newton Grabber is a versatile tool that suits a wide range of subsea applications. From delicate maneuvers to robust tasks, the grabber's capabilities adapt to the requirements of your mission. Its ability to retrieve objects and interact with the subsea environment opens up endless possibilities for scientific research, inspection, search and rescue operations, and more. Ease of Installation and Everything You Need Poseidon Robotics prioritizes simplicity and efficiency in every aspect, including installation. The Newton Grabber comes complete with everything needed for seamless installation on the BlueROV2. It has been meticulously designed the system to ensure a hassle-free integration process, allowing you to get your subsea vehicle up and running quickly. Experience Poseidon Robotics Quality As pioneers in subsea robotics, Poseidon Robotics consistently delivers products that redefine industry standards. The Newton Grabber is no exception, setting a new benchmark for performance, reliability, and versatility. Designed to endure the harshest underwater conditions, this grabber is engineered to withstand the demands of challenging subsea operations. Unlock New Possibilities with the Newton Grabber Are you ready to take your subsea operations to the next level? Unlock the full potential of your BlueROV2 or subsea vehicle with the Newton Grabber. Reach out to us today, and let our team of experts assist you in choosing the perfect solution for your specific needs. Experience the power of precision and elevate your subsea exploration with Poseidon Robotics.

Expert Safe-T-Whip Qualified Installers: Your Gateway to Safety and Efficiency At Safe-T-Whip & Restraints Inc., we not only offer top-of-the-line safety restraint systems but also a comprehensive service that ensures your worksite meets all safety standards. Renting or owning your own Safe-T-Whip system is a step towards enhanced safety, but qualified installation personnel are essential to ensure compliance with local safety codes. That's where our expert qualified installers come in to make a real difference. Your Safety, Our Priority: We understand the criticality of safety in the oilfield, and that's why we provide the option of sending our qualified installers to your site to perform the rig up and down. Their expertise and experience ensure that every aspect of the installation process meets the highest safety standards, giving you peace of mind that your workforce is protected. Empowering Your Crew: Alternatively, we can certify one of your own crew members to become proficient installers through our Safe-T-Whip certification process. We provide comprehensive training that equips them with the knowledge and skills needed to perform installations efficiently and effectively. Once trained, they'll be able to rig up and down the system confidently, ensuring maximum safety for your operations. Quick and Easy Installation: The Safe-T-Whip system is designed with simplicity and efficiency in mind. Whether our qualified installers handle the setup or your certified crew members take charge, you'll quickly discover just how quick and easy the installation process can be. Understanding the flow of the links and checking for complete link coverage becomes second nature with our training. Ensuring Your Safety: Your worksite's safety is at the core of our service. No matter which installation option you choose, we are here to help you every step of the way. Rest assured that with our qualified installers or your certified crew, your Safe-T-Whip system will be installed correctly, ensuring maximum protection for your team and equipment. Lightweight and User-Friendly: The entire Safe-T-Whip system is designed to be lightweight and user-friendly. Hauling and installing it require just a single person, enhancing convenience and making it a practical safety solution for your oilfield operations. Choose Safe-T-Whip & Restraints Inc. for Enhanced Safety: With Safe-T-Whip qualified installers, you gain access to a team of experts who prioritize your safety above all else. Contact us today and discover how we can make your worksite safer and more efficient. At Safe-T-Whip & Restraints Inc., your safety is our commitment.

ELEKS Software Audit Services: Uncover Excellence in Every Line of Code In the dynamic landscape of software development, ensuring your products and processes are performing at their peak is crucial. ELEKS Software Audit Services empowers you to navigate the challenges and seize the opportunities that lie within your software solutions. With an unbiased approach, we help you identify strengths and weaknesses, mitigate risks, and streamline your path to success. ELEKS Software Audit Services: Guiding Your Path to Excellence Identify Flaws in Your SDLC: Our unbiased evaluation scrutinizes your current products, internal processes, and documents to identify strengths, weaknesses, and potential risks within your Software Development Lifecycle (SDLC). With these insights, we pave the way for a fortified software solution that stands strong against challenges. Build the Ultimate Product: Rigorous QA testing subjects your product to industry-acknowledged standards including IEEE 829, ISO 29119, IEEE 730, and ISO 25010. Our unbiased framework maximizes efficiency and detects bottlenecks before launch, equipping your product with the robustness it needs to thrive. Speed to Market: Our meticulous software audit identifies bottlenecks and snags within your software, development, and testing processes. This optimization not only saves valuable time but also preserves your revenue streams, driving your product faster to market. Elevate Project Artifacts: Project documentation and software outputs undergo rigorous evaluation, enhancing business maturity and elevating your overall development process. With our insights, your software journey becomes a path towards continual improvement. Craft a Solid Action Plan: Through stringent diagnostics, we pinpoint issues in your project maturity and business analysis processes. Our collaboration results in a well-defined software action plan, optimizing efficiency and shaping a brighter future. Build a Roadmap for Success: Post-evaluation, we collaborate closely to create a resilient framework for your software operations. We offer continued support, ensuring your path forward is clear and confident. Minimize Post-Release Issues: Validating end-to-end application performance, we detect software defects before your product goes live. Proactive identification and resolution of defects safeguard your product's performance and uphold your brand reputation. ELEKS Software Audit Services: A Five-Step Excellence Framework Discovery: • Plan and prepare • Identify business needs and goals Analysis: • Collect and analyze data • Conduct interview sessions • Verify findings • Present and discuss findings Presentation: • Present findings and recommendations Implementation: • Co-create an action plan • Implement audit recommendations Control: • Follow-up on the action plan Empower Your Software Solutions: Development Process Audit: Evaluate the stability of every facet of your process framework, from development and release to project management, QA, and BA processes. Software Audit: Our experts conduct comprehensive diagnostics to assess the strength of your software solution, covering architecture, database, code quality, security, UI/UX, and more. Post-Audit: Receive a summary report detailing discrepancies, their severity, associated risks, and recommendations. Collaborate with us to craft a detailed action plan for issue resolution. ELEKS Software Audit Services: Your Gateway to Excellence With ELEKS Software Audit Services, your software solutions are fortified, risks are mitigated, and excellence is uncovered. Let us guide you through the labyrinth of software development, ensuring every line of code is a testament to your success. Elevate your software solutions with ELEKS, where excellence is not just a goal, but a guarantee.

ELEKS: Transforming Energy Excellence with Cloud-First Strategies In the dynamic realm of the energy sector, innovation isn't a luxury – it's a necessity. ELEKS takes the lead, harnessing our unparalleled energy sector technology expertise to redefine the way you manage energy and utilities. With our cutting-edge cloud-first strategies, we're here to propel your operations to new heights of efficiency, cost-effectiveness, and security. Here's how ELEKS can be your catalyst for an energy future that's smarter, more connected, and infinitely more agile: Tailored Cloud-First Strategies: Your organisation is unique, and so are our strategies. ELEKS expertly tailors cloud-first approaches to fit your specific needs, unlocking unparalleled potential for your energy operations. Performance Optimization: Elevate your performance benchmarks with cloud-first strategies. Our solutions optimize the performance of your software systems, ensuring they operate at their peak efficiency. Cost-Effectiveness Amplified: Say goodbye to bloated budgets. Our cloud-first strategies enhance cost-effectiveness, helping you allocate resources efficiently and maximize the return on your technology investments. Resilience Reinvented: Your operations require robustness. ELEKS' cloud-first strategies bolster the resilience of your systems, ensuring seamless operations even in the face of challenges. Data Security Elevated: Data security is non-negotiable. With our cloud-first strategies, safeguarding your data becomes paramount, protecting your valuable assets from any potential threats. Big Data Unleashed: Embrace the power of Big Data with ELEKS. Our cloud migration services enable you to harness Big Data's potential, enhancing customer satisfaction through real-time analytics on energy consumption. Real-Time Customer Insights: Elevate your customer experience game. Our solutions empower you to provide end-users with real-time insights into their energy consumption, fostering satisfaction and engagement. Advanced Data Analytics: Data is your ally. Our team of custom software development experts implements cloud-based solutions infused with advanced data analytics, turning raw information into actionable insights. ML-Driven Precision: Embrace the future of energy management. Our solutions feature Machine Learning (ML) capabilities, enabling predictive maintenance and driving the precision of your energy systems. ELEKS: For an Agile Energy Future ELEKS isn't just a service provider – we're your innovation partner. Our energy sector technology expertise doesn't just promise solutions; it delivers transformation. With ELEKS, you're not just adopting cloud-first strategies – you're embracing an energy future that's agile, connected, and limitless. Join us in scripting a new energy narrative where innovation meets precision, cost-effectiveness is a norm, and security is paramount. With ELEKS, you're stepping into a realm where technology-driven solutions redefine energy excellence and operational aspirations become reality. Embrace a future where cloud-first strategies power your energy journey, and efficiency is at the heart of every operation.

Introducing the Revolutionary EDC (External Dimple Connector) from Marlin Oil Tools: The Essential Link for Coiled Tubing Applications in the Oil and Gas Industry Marlin Oil Tools proudly presents our state-of-the-art EDC (External Dimple Connector), a groundbreaking solution designed to seamlessly integrate the smooth lower end of coiled tubing (CT) with any requisite downhole tool for efficient well intervention operations. The EDC stands out in the oil and gas sector for its innovative design and unparalleled reliability, making it a must-have for your well intervention toolkit. Key Features of the EDC (External Dimple Connector): Seamless Integration: The EDC provides a flawless connection between the smooth-walled end of the CT and the threaded interface of downhole tools, ensuring a secure and efficient link for well intervention jobs. Advanced Connection Mechanism: Equipped with a unique holes matrix in the upper housing, the EDC utilizes set screws installed in precision-pressed dimples, offering a robust and reliable connection without compromising the integrity of the coiled tubing. Threaded Lower Part: The connector's lower portion features a meticulously designed thread for attaching any downhole tool, facilitating a versatile and adaptable solution for various well intervention needs. High-Performance Sealing: Installation of the EDC is enhanced with two O-rings made from the durable FKM 90 material, providing a high-integrity seal between the internal space of the connector and the annulus, ensuring operational safety and efficiency. Effortless Installation: The EDC can be effortlessly installed using a dimple tool, capable of mechanical or hydraulic pressing, simplifying the assembly process and minimizing downtime during critical operations. At Marlin Oil Tools, we understand the complexities and challenges of well intervention in the oil and gas industry. Our EDC (External Dimple Connector) is designed to address these challenges, offering a reliable, efficient, and high-quality connection solution for coiled tubing operations. Whether you are conducting routine maintenance, stimulation, or any other well intervention job, the EDC ensures a seamless, secure, and effective operation. Why Choose Marlin Oil Tools' EDC? Unmatched Reliability: Engineered for durability and performance, the EDC withstands the harsh conditions of downhole operations, ensuring reliability when it matters most. Versatility: Compatible with a wide range of downhole tools, the EDC offers unparalleled flexibility for your well intervention needs. Quality Assurance: At Marlin Oil Tools, quality is at the forefront of everything we do. The EDC is manufactured to the highest industry standards, ensuring peak performance and safety. Elevate your coiled tubing operations with the EDC (External Dimple Connector) from Marlin Oil Tools. Contact us today to learn more about how our innovative solutions can enhance your well intervention strategies and drive operational success.

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

A wrench ensures the workability of the object so that it continues to work as fast and effectively as before. It is basically used to provide a strong grip; it is also known as a spanner. Using a wrench is extremely easy. A double-ended tool with one end being like an open-end wrench or open-ended spanner, and the other end being like a box-end wrench or ring spanner. Both ends generally fit the same size of bolt.

The AD-1™ tension packer is a compact, economical, retrievable packer. Primarily used in waterlood applications, it can also be used for production, treating operations, and when a set-down packer is impractical. And because the AD-1 is tension-set, it is ideally suited for shallow wells where set-down weight is not available. The ADL-1™ tension packer is a large-bore version of the AD-1 and offers the same features and beneits; running and retrieving operations are also the same. We can source from current stock or direct from the manufacturer.

All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required.

Lanai ROV - The Ultimate All-In-One Solution for Subsea Operations Everything You Need - Ready to Dive Right In Imagine having all the tools you need at your fingertips, without the hassle of assembling and configuring complex systems. Introducing the Lanai ROV, the epitome of simplicity and efficiency. Designed by ROV operators for operations, the Lanai ROV is here to revolutionize your subsea exploration. Simplicity Meets Capability At Poseidon Robotics, we understand that time is of the essence in the underwater world. The Lanai ROV comes fully assembled and ready to run straight out of the case, saving you valuable setup time. With a fully integrated console, tether reel, and factory-tested system, you can dive into your work without the need for a laptop. Engineered for Excellence Drawing upon decades of ROV operation experience and leveraging modern manufacturing techniques, we've created a remotely operated vehicle that sets new standards for capability and affordability. The Lanai ROV offers an unparalleled combination of features that will empower your missions. Pack More, Explore More The Lanai ROV's deck space and buoyancy cutouts offer ample room for a variety of payloads, including imaging sonar, scanning sonar, USBL, altimeter, CTD, UT, and Reach Alpha 5F manipulator. You won't need a tooling skid or extra buoyancy, maximizing your operational flexibility. Versatility at Your Fingertips Standard options such as the 125m tether/reel, console, and controller are just the beginning. With the Lanai ROV, you have the freedom to customize your setup with additional choices like the Newton grabber, waterproof transport cases, spare parts/tools, and more. Rest assured with our 2-year warranty - because your peace of mind is our priority. Unlock the Potential of Sonar Exploration With the Lanai ROV, discovering the underwater world has never been more accessible. The Sliding Aluminum Brackets are designed to securely hold a Cerulean Sonar ROVL (USBL), Blue Robotics Ping360 Sonar, DiveNET GPS (LBL), and many other sonars and beacons. Raise and lower the brackets effortlessly with an Allen Key to protect your valuable equipment from potential obstacles. The Power Behind the Performance Unleash the potential of the Lanai ROV with its impressive specifications: • Depth Rating: Dive confidently to 400m, exploring new depths and territories. • Compact and Lightweight: At just 13.0kg in air and dimensions of 559x356x305mm (LWH), the Lanai ROV is highly maneuverable and portable. • Payload Capacity: With a capacity of 2.1kg in freshwater, you can equip your Lanai ROV with a range of essential sensors and tools. • State-of-the-Art Thrusters: Experience precision movements with 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters. • Superior Imaging: Capture the underwater beauty with a 1080 HD IP camera with tilt and four 1,500 Lumen lights for optimal visibility. The Console - Your Command Center Control your exploration effortlessly with the Mini Integrated Console. Boasting a 12in HD monitor (1,200NIT) and fully isolated output with GFCI, it houses an Intel PC with pre-configured software for seamless operations. Unleash the Exploration with Lanai ROV Take charge of your underwater missions with the Lanai ROV. Simplify your operations, maximize your payload options, and explore with confidence. Contact us today to embark on your journey with the Lanai ROV - The Power of Simplicity, Unleashed.

Houston Digital Instruments (HDI Gauges) is proud to present the HDI 2000B Pressure Gauge System, an intrinsically safe and certified electronic gauge designed to provide accurate and reliable pressure measurements in various industries. With its solid-state platform and field-proven performance, the 2000B system offers exceptional safety, versatility, and low maintenance for users. Let's delve into the features and configurations of this cutting-edge pressure gauge system. Certified Accuracy and Safety: The HDI 2000B Pressure Gauge System is meticulously designed to meet rigorous industry standards. It is certified as intrinsically safe, Class 1, Division 1, Groups A, B, C, and D by CSA. For ATEX/IECEX certification, the gauge system measures pressure ranges up to 20,000 psi, while CSA certification is currently available up to 16,000 psi, with the 20,000 psi option becoming available later in 2023. Regardless of the certification level, all HDI pressure equipment guarantees an accuracy of 0.50% of full scale, ensuring precise measurements in demanding environments. Versatile Applications and Configurations: The HDI 2000B can be combined with a variety of sensor types, making it suitable for pressure, load, force, and torque applications across various industries. Whether you require primary or secondary display capabilities, the 2000B system offers flexible configurations to meet your specific needs. Slave and secondary display options are available, allowing you to extend visibility to multiple locations and optimize data monitoring and control. Reliable and Field Repairable: HDI believes in empowering users to maintain and repair their instruments easily. The 2000B Pressure Gauge System is battery-powered and field repairable, reducing downtime and spare unit inventory costs. Our DIY maintenance options enable you to quickly resolve issues, ensuring uninterrupted operation and minimizing the impact on your productivity. Additionally, the system includes a low battery indicator, providing timely notifications for battery replacement or recharging. Robust Features for Enhanced Performance: The HDI 2000B system is equipped with a range of features designed to enhance performance and usability. It offers pressure measurements from 30 psi up to 20,000 psi, with the option to request kPa or bar units. The system provides a high-resolution display with a 10 psi resolution, ensuring precise readings for critical applications. The solid-state platform eliminates the need for fluids or moving parts, resulting in consistent performance even in high vibration environments. An analog bar graph with a divided scale further enhances the readability of the gauge, enabling quick and accurate data interpretation. Wide Range of Configurations: To accommodate various requirements, the HDI 2000B Pressure Gauge System offers different output options. You can choose between a 4-20mA output (additional barrier required) or a 0-1 volt output, depending on your connectivity needs. The system also supports slave and secondary displays, allowing you to extend visibility and enhance data sharing across your operations. The HDI 2000B Pressure Gauge System stands as a reliable and accurate solution for demanding applications across industries. With its intrinsically safe certification, certified accuracy, and robust design, the 2000B system provides users with a dependable tool for precise pressure measurements. Its versatility, field repairability, and low maintenance requirements contribute to minimized downtime and enhanced operational efficiency. Contact HDI today to discuss your specific application requirements and experience the reliability and performance of the HDI 2000B Pressure Gauge System.

Introducing the STM Step Mill from Marlin Oil Tools: Your Go-To Solution for Advanced Well Intervention and Milling Operations Marlin Oil Tools is excited to offer the STM Step Mill, a cutting-edge downhole tool specifically designed to enhance the efficiency of well intervention jobs. Whether you're dealing with bridge plugs, emergency lost equipment, or any obstruction softer than the mill's cutter, the STM Step Mill is engineered to grind and wash out these objects with unmatched efficiency. Key Features of the STM Step Mill: Superior Milling Performance: Designed to navigate and mill through downhole obstructions effectively, ensuring a clear wellbore for optimal production. Reduced Friction Surface: The STM Step Mill features a unique design with less friction surface, enabling it to mill out harder materials more efficiently than traditional tapered mills. Enhanced Weight-on-Bit Application: Its innovative design allows for higher weight on bit without the risk of stalling the downhole motor, maximizing milling effectiveness. Optimal Debris Removal: Equipped with multiple flushing holes, the STM ensures the efficient circulation of drilling fluid to remove milled particles from the well and cool the cutting edge. Durable Carbide Construction: Built with carbide welded onto the body, including options for crushed carbide and various insert designs, the STM Step Mill is designed for longevity and performance in challenging milling conditions. Comprehensive Redress Services: Marlin Oil Tools offers redress services for worn carbide, ensuring your STM Step Mill maintains peak performance throughout its service life. Elevate your well intervention strategies with the STM Step Mill from Marlin Oil Tools, a premier downhole tool designed for the oil and gas industry. Tailored for efficient grinding and removal of downhole obstructions, the STM Step Mill stands out with its reduced friction surface and ability to tackle harder materials without stalling the downhole motor. With its advanced carbide construction, optimal debris removal capabilities, and customizable insert options, the STM Step Mill is the ideal choice for increasing the ID of well restrictions and ensuring smooth wellbore conditions. Opt for Marlin Oil Tools’ STM Step Mill for enhanced well intervention and milling operations, backed by comprehensive redress services to extend tool life and performance. Why Choose the STM Step Mill from Marlin Oil Tools? Advanced Milling Efficiency: Offers unmatched efficiency in grinding down wellbore obstructions. Capability to Mill Harder Materials: Designed to tackle harder materials with greater ease compared to conventional mills. Higher Weight-on-Bit Flexibility: Enhances milling operations by allowing higher weight on bit without compromising tool performance. Customization and Longevity: Provides various carbide insert designs and redress services, ensuring a long service life tailored to your specific operational needs. The STM Step Mill by Marlin Oil Tools represents the forefront of downhole milling technology, offering a powerful solution for oil and gas operators focused on optimizing well intervention outcomes. Incorporate the STM Step Mill into your operations for smoother, more efficient wellbore preparation and obstacle management.

Empowering Your ROV: Introducing Poseidon Robotics' Mini-HPU (Hydraulic Power Unit) At Poseidon Robotics, we are committed to pushing the boundaries of subsea exploration and ensuring that your ROV missions are equipped with cutting-edge technology. Our latest innovation, the Mini-HPU (Hydraulic Power Unit), is designed to deliver unmatched power and reliability, elevating the capabilities of your hydraulic manipulators and tools on larger ROVs. Compact Powerhouse Don't let the size fool you! The Mini-HPU may be compact, but it packs a powerful punch. With a robust 3 horsepower output, this little dynamo is built to handle the most demanding subsea tasks with ease. The Mini-HPU provides the muscle you need to operate hydraulic manipulators and tools on larger ROVs effectively. Integrated Efficiency Efficiency is the name of the game, and the Mini-HPU excels in this aspect. Integrated within its sleek design is a convenient 1-gallon reservoir, ensuring an uninterrupted flow of hydraulic fluid to keep your operations running smoothly. No need to worry about external reservoirs, as everything you need is perfectly contained within this powerful unit. Adjustable Pressure Relief and Replaceable Filters We understand the importance of adaptability in your subsea operations. The Mini-HPU features an adjustable pressure relief valve, allowing you to fine-tune the pressure to suit your specific needs. Additionally, we've equipped this hydraulic power unit with easily replaceable filters, ensuring that your system stays clean and optimized for peak performance. Reliability at Its Core At Poseidon Robotics, we believe in building products that stand the test of time. The Mini-HPU is no exception. Its high reliability fixed displacement pump ensures consistent and dependable performance, allowing you to focus on your mission without worrying about equipment failures. Unleash Your ROV's Potential With a maximum pressure of 2,500 PSI and a maximum flow of 1.6 gallons per minute (standard pump), the Mini-HPU is a formidable force in the subsea realm. It's designed to tackle a wide range of applications, from deep-sea exploration to intricate industrial tasks. Corrosion-Resistant Design The subsea environment can be harsh and unforgiving, but the Mini-HPU is ready for the challenge. Our engineers have crafted the unit with anodized aluminum, providing exceptional corrosion resistance and eliminating the need for additional paint coatings. Your Trusted Subsea Partner Poseidon Robotics takes immense pride in being a trusted partner for subsea robotics and ROV companies worldwide. The Mini-HPU is a testament to our commitment to delivering advanced solutions that elevate your capabilities and redefine what's possible in the underwater world. Experience the Mini-HPU Difference Ready to take your ROV missions to new depths? Explore the power and versatility of Poseidon Robotics' Mini-HPU and unlock a world of possibilities for your subsea operations. Contact us today and witness the next level of subsea performance with the Mini-HPU by your side.

Our acid tanks come enclosed in a steel frame designed for safe offshore transport and are DNV certified. Available for a variety of acid chemicals and volumes, these tanks can be safely transported by truck, ship, or crane.

Enhance Your Operational Efficiency with Pump Leasing from CWB National Leasing Streamlining Your Business with Cost-Effective and Flexible Equipment Solutions For businesses in industries such as construction, mining, agriculture, or wastewater management, pumps play a crucial role in the efficient handling of liquids and fluids. Leasing pumps through Canadian Western Bank (CWB) National Leasing offers a practical and financially astute solution to meet diverse operational needs. Here’s how leasing pumps can be a game-changer for your business: 1. Swift Equipment Access Recognizing the critical nature of uninterrupted operations, CWB National Leasing provides a fast and efficient leasing process. With decisions typically made within 48 hours of application, your pumps can be delivered and operational promptly, minimizing downtime and enhancing productivity. 2. Increased Financial Leverage Leasing pumps with CWB National Leasing enhances your financial flexibility. It allows you to conserve capital by choosing periodic payments over a substantial initial outlay, freeing up resources for other essential business activities. Additionally, you can customize your pumps with extra features or accessories for a small payment increase, enhancing their functionality. 3. Balanced Cash Flow Management Manageable lease payments over the term allow your pumps to contribute to your business’s revenue while they’re being paid off. This strategy is key in maintaining a healthy expense-to-revenue ratio, essential for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers various payment plans, including seasonal, semi-annual, or annual options, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal or variable income, ensuring that payments align with your financial capacity. 5. Potential Tax Advantages Leasing pumps can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease pumps through CWB National Leasing is a strategic decision that equips your business with vital equipment while maintaining financial agility. It ensures access to high-quality pumps, crucial for efficient operations across various industries, without the financial burden of a large upfront purchase. This leasing approach enables enhanced operational capabilities, improved efficiency, and increased profitability, helping your business to thrive in its respective field.

Enhance Your Workspace with Desk Leasing from CWB National Leasing Creating an Efficient and Productive Office Environment with Flexible Furnishing Solutions For businesses looking to create or revamp their office spaces, having the right desks is crucial for ensuring a productive and comfortable work environment. Leasing desks through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to optimize their workspace. Here’s how leasing desks can benefit your business: 1. Quick Access to Modern Office Furniture CWB National Leasing values the importance of a well-equipped office space in enhancing productivity. They offer a fast leasing process, with decisions typically made within 48 hours of your application. This rapid service ensures that your desks can be delivered and set up quickly, transforming your office space without significant delays. 2. Increased Financial Flexibility Leasing desks with CWB National Leasing enhances your financial power. It allows you to conserve capital by opting for periodic payments over a large upfront purchase. The flexibility to add extra features or accessories to your desks for a small payment increase allows for customization to meet specific office needs and ergonomic considerations. 3. Effective Cash Flow Management Manageable lease payments over the term mean your desks start contributing to your business’s efficiency while they're being paid off. This approach helps maintain a balanced expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing desks can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease desks through CWB National Leasing is a strategic decision that equips your business with essential office furniture while maintaining financial flexibility. It ensures access to high-quality desks, vital for creating a productive and comfortable working environment, without the financial strain of a large upfront investment. This leasing approach enables enhanced office aesthetics, improved employee comfort, and increased overall productivity, helping your business to thrive in a competitive corporate landscape.

The Bomco Triplex Mud Pump has a herringbone design and is interchangeable with the Continental Emsco FB model. Mud pumps serve as the heart of the mud circulating system. Reciprocating piston pumps (also called slush pumps or power pumps) are widely used for drilling oil and gas wells. The advantages of the reciprocating positive-displacement pump include the ability to move high-solids-content fluids laden with abrasives, the ability to pump large particles, ease of operation and maintenance, reliability, and the ability to operate over a wide range of pressures and flow rates by changing the diameters of the compression cylinders (pump liners) and pistons. A pump that has single-action strokes in three cylinders is called a triplex pump.