BMS Versol T

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Stay Cybersecure with ALCiT: Your Shield in an Uncertain Digital Realm In a world where digital threats lurk at every corner, staying cybersecure is no longer an option—it's a necessity. But we get it; navigating the intricacies of cybersecurity can be overwhelming, even frightening. That's where we come in, your unwavering allies in the pursuit of digital safety. Empowerment Through Expertise ALCiT stands as a beacon of assurance in the cybersecurity landscape. As trusted experts, we specialize in assisting Small and Medium Enterprises (SMEs) on their journey to become and remain cybersecure. You've laid the foundation, you've improved your cyber resiliency, and now it's time to complete the puzzle by staying cybersecure. Master the Art of Staying Secure Cyber threats are relentless, but so are we. With ALCiT's managed services, you can confidently detect cyber threats, respond to incidents, and maintain your cybersecure stronghold. Our solutions go beyond the traditional; they encompass a holistic approach that equips your organization with the tools and strategies needed to stay ahead. Why Choose Cybersecurity with ALCiT? Tech in Check: Keeping your technology secure is our priority. We diligently monitor, update, and optimize your tech environment, ensuring every vulnerability is addressed and every weakness fortified. Team Training: Empower your team to be your first line of defense. Our comprehensive training programs arm them with the knowledge to identify and respond effectively to potential threats. Vigilance is Key: Staying vigilant is half the battle. Our managed services include real-time monitoring, ensuring that any abnormal activity is detected and neutralized promptly. Effective Response: Cyber incidents can strike anytime. With ALCiT by your side, you're equipped to respond swiftly and effectively, minimizing potential damage and ensuring business continuity. Efficient Recovery: The aftermath of an attack can be daunting, but we've got your back. ALCiT's recovery strategies are designed to expedite your return to normalcy, reducing downtime and impact. Secure Today, Thrive Tomorrow ALCiT stands for more than just services; we stand for security, empowerment, and peace of mind. Let us be your cybersecurity partner as you navigate the intricate landscape of digital threats.

Ensuring Continuity with InWaTec Combined’s Electric Line Pipe Recovery Services In the dynamic arena of oil and gas extraction, the unexpected is the only constant. One of the most formidable challenges that can grind operations to a halt is the dreaded scenario of a stuck drill string. Recognizing the critical need for swift and effective resolution, InWaTec Combined offers specialized Electric Line Pipe Recovery Services, designed to address and rectify such downhole dilemmas. When a drill string becomes lodged downhole, it is not just an obstacle; it represents a halt in production, potential damage to resources, and a significant operational cost. InWaTec Combined's Electric Line Pipe Recovery Services are the answer to this industry-wide challenge. Our services employ advanced wireline technology, leveraging the power of electric lines to deliver targeted interventions that free the stuck pipe. Our approach to pipe recovery combines precision-engineered tools with real-time data transmission capabilities. This dual advantage enables our skilled operators to assess the situation accurately and execute recovery procedures with minimal risk to the wellbore or the environment. By integrating our electric line expertise with our pipe recovery operations, we ensure that your drill rig can return to its primary function with minimal downtime. The electric lines play a crucial role; they not only serve as a conduit for the necessary tools to navigate the wellbore but also provide a continuous stream of data back to the surface. This data is critical for making informed decisions during the recovery process, allowing for adjustments and interventions that are precise and situation-specific. At InWaTec Combined, we understand that time is of the essence in such operations. Our Electric Line Pipe Recovery Services are designed for rapid deployment and execution, ensuring that your operations can swiftly transition from a state of suspension to full productivity. Our commitment to innovation, safety, and efficiency is unwavering, as we strive to provide solutions that minimize operational disruptions and maintain the integrity of your wellbore. In the face of stuck pipe challenges, you can count on InWaTec Combined to deliver not just services, but solutions that propel your operations forward. Trust in our expertise to navigate the complexities of downhole recovery, ensuring that your operations remain resilient and robust, no matter what obstacles lie beneath.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer

ELEKS Software Testing and QA Services: Elevate Your Product Excellence In the fast-paced realm of software development, delivering a product that not only works but excels is the key to standing out in the crowd. ELEKS Software Testing and QA Services empower you to not just meet industry standards, but to exceed them. With our custom-built services, you can ensure a robust, high-performing, and user-centric product that captures your audience's attention. ELEKS Software Testing and QA Services: Your Path to Excellence Deliver Seamless User Experience: Our performance testing service empowers you to address issues related to peak performance, responsiveness, security, and stability long before your users encounter your product. By mitigating brand-damaging lag or downtime, you can confidently deliver an experience that resonates with your audience. Accelerate Time-to-Market: With our support, you can speed up your product's journey to market by up to 80%. Through performance and test automation services that align with continuous integration and deployment, we identify issues early in the development cycle, enabling you to avoid costly rework. Trim Development Costs: ELEKS' testing services uncover issues during the early stages of your Software Development Lifecycle (SDLC) when rectifications are less expensive. Experience up to 20% reduction in testing costs with our test automation service, which streamlines human resources and testing time. What's more, your custom test scripts can be reused at no additional cost. Scale Your Business Rapidly: Implement continuous Quality Assurance (QA) to adapt swiftly to your customers' evolving needs. Our independent testing service offers an impartial second opinion, enhancing your ability to identify pitfalls and risks and giving you the confidence to scale your business. Ensure Software Compliance: Guarantee your software aligns with critical quality standards like IEEE 829, ISO 29119, IEEE 730, and ISO 25010. Our framework adheres to industry standards across performance testing, independent testing, and automated testing processes. ELEKS Software Testing and QA Services: Unveiling Excellence Software Audit: Assess your code's quality, test coverage, security, user experience, and integration layer with our software audit service. Make the necessary enhancements to ensure your product's integrity. Performance Testing: Leverage our performance testing service to construct responsive, stable, and scalable applications with an astounding 80% reduction in testing time. Test Automation: Experience up to 20% cost reduction in manual QA expenses. Our test automation detects bugs, eliminates human errors, and tests your software's resilience, ensuring excellence at every level. ELEKS Software Testing and QA Services: Elevate Your Excellence ELEKS Software Testing and QA Services lead you on a journey where quality isn't just a goal – it's a guarantee. Elevate your software products to excellence, with high-performance, user-optimized solutions that exceed expectations. Harness the power of ELEKS to not only meet industry standards but to set new benchmarks for software excellence.

Introducing the Canaweld MIG Spool Gun CST251: Your Ultimate Solution for Precise Aluminum Welding When it comes to welding aluminum, achieving a stable arc and reliable feed is crucial for success. Meet the Canaweld MIG Spool Gun CST251, a game-changing accessory designed to enhance the "feed ability" of aluminum and other challenging wires, providing welders with exceptional control and precision. Unleash the Power of Aluminum Welding - Experience Unmatched Feeding Performance The Canaweld CST251 Spool Gun revolutionizes the welding experience with its short feed distance, offering a steady, reliable feed of soft aluminum wire. This pistol-grip style spool gun houses a compact 1 lb. 1/4-inch diameter spool of wire, delivering the perfect solution for feeding difficult wires like aluminum through the standard MIG gun. Experience Efficiency and Reliability - Designed for Excellence The CST251 spool gun is a lightweight, well-balanced semi-automatic gun with dual groove drive rolls and a heavy-duty all-metal wire feeder. Setting up the spool gun is a breeze, ensuring welders can quickly and efficiently achieve exceptional aluminum wire feeding with a variety of CV power sources and engine-driven welders. Remarkable Features that Make a Difference Let's explore the outstanding features of the Canaweld MIG Spool Gun CST251: 1. Multiple Processes: The CST251 is suitable for MIG (GMAW), Pulsed MIG (GMAW-P) with pulsing power sources, and FCAW, providing versatility for a wide range of welding applications. 2. Wire Types: Designed to handle aluminum, steel, and flux-cored wire, the CST251 is the ultimate companion for welding various materials with ease. 3. Industrial Applications: From trucks, trailers, and railcars to aerospace hardware, boat/yacht building, and recreational vehicles, the CST251 excels in diverse industrial applications. 4. Precision Welding: Perfect for automotive/motorcycle frames, sports products like scooters and bicycles, furniture, ladders and frames, ship decks, sign manufacturers, and general repair and maintenance. 5. Easy Maintenance: The CST251 features easy access to the drive assembly, reducing service time, and allowing routine maintenance without disassembling the gun. Elevate Your Welding with Canaweld MIG Spool Gun CST251 At Canaweld, we are dedicated to empowering welders with cutting-edge solutions that enhance their productivity and performance. The CST251 Spool Gun is a testament to our commitment to excellence, providing welders with the tools they need to achieve precise and reliable aluminum welding in diverse industrial settings. Experience the difference of seamless aluminum wire feeding with the Canaweld MIG Spool Gun CST251 - Your Ultimate Solution for Precision Welding!

Welcome to the ultimate solution for maintaining cleanliness in the most demanding industrial environments. Our 20-liter EnviroBlu cleaner is specially formulated to tackle tough dirt and grime efficiently, ensuring your workspaces are pristine while upholding the highest safety and environmental standards. Ideal for Harsh Conditions When you are dealing with stubborn industrial dirt, the 20-liter EnvirioBlu cleaner simplifies your cleaning processes. It's powerful yet safe and eco-friendly, perfect for industries that value efficiency and environmental responsibility. This large volume packaging is designed for cost-effective, long-term use, reducing the frequency of purchases and ensuring you get more cleaning done with less. See the difference for yourself and experience a cleaner, safer, and more efficient workplace. Please contact us for more information.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer

InWaTec Combined: Precision Perfected with Our Broaching Tool Running Services In the complex tapestry of well service operations, precision is not just a goal—it's a necessity. At InWaTec Combined, we infuse this precision into every aspect of our work, especially when it comes to preparing wellbore tubing for subsequent interventions. Our Broaching Tool Running services epitomize this commitment, ensuring that wellbore tubings are in optimal condition for running or pulling service tools. The Critical Role of Broaching The wellbore is the heart of any drilling operation, and like any heart, it must be free from obstructions to function correctly. Enter the broach—InWaTec Combined’s answer to the industry's need for flawless tubing surfaces. Our broaching tools are engineered to meticulously remove metal burrs and imperfections that could jeopardize the integrity of service operations. By ensuring a clean and smooth tubing wall, we set the stage for efficient and trouble-free servicing. Advanced Broaching Technology Our broaching tools are not just tools; they are precision instruments. Equipped with graduated rings, diamonds, or segments, our broaches are case-hardened to withstand the rigors of the well environment. Their highly sharpened edges are designed to cut through imperfections with surgical precision, leaving behind a surface that meets the industry's highest standards. The InWaTec Combined Edge When you choose InWaTec Combined for broaching tool running services, you're not just getting a service; you're acquiring a partnership that values excellence. We understand that the quality of broaching directly impacts the success of your subsequent operations. That's why we've invested in developing a team of experts and a fleet of tools that stand unrivaled in quality and performance. Ensuring Success Down the Line Our broaching service is a critical precursor to a variety of downhole operations. By preparing your tubing with our broaching tools, you are ensuring that subsequent tools can be run or pulled with minimal risk of snagging or damage, thus preserving the integrity of your operations. This not only saves time but also reduces the likelihood of costly interruptions. Your Assurance of Quality At InWaTec Combined, our reputation is built on the back of our commitment to quality and precision. Our broaching tool running services are a testament to this promise. We don’t just deliver a service—we ensure that your wellbore is in the best possible condition for whatever comes next. In conclusion, with InWaTec Combined's Broaching Tool Running services, you can rest assured that the critical first step in your well servicing operations is in the most capable hands. Our precision tools and expert operators stand ready to deliver a seamless service experience that sets a solid foundation for your well's longevity and productivity.

Are you looking for a game-changing solution that can revolutionize your oil and gas operations? Look no further than the Lean Environmental Services System (LESS) unit, the innovative mobile system designed to minimize pollution, risks, costs, and time during well service operations. The LESS unit is specifically designed to support and assist various well service operations such as electric line, slickline, and coiled tubing. By preventing any fluid or gas releases during these operations, the LESS unit can eliminate risks to people and the environment. The unit stores all the fluids into its tanks, reducing the risk of spills and leaks that can lead to costly cleanup operations and environmental damage. In addition to reducing risks and pollution, the LESS unit can significantly reduce costs and time associated with well service operations. With its efficient design and advanced technology, the unit can streamline operations and enhance productivity, resulting in faster job completion and higher efficiency. But that's not all - the LESS unit also offers the possibility to re-inject fluids into the well at the end of the job, further reducing environmental impact and promoting responsible resource management. With its sustainable features and advanced technology, the LESS unit is a powerful tool for companies looking to improve their environmental performance and reduce their carbon footprint. Don't miss out on the opportunity to revolutionize your operations with the Lean Environmental Services System (LESS) unit. Contact us today to learn more about how this innovative mobile system can benefit your business and help you achieve your sustainability goals.

ELEKS Software Audit Services: Uncover Excellence in Every Line of Code In the dynamic landscape of software development, ensuring your products and processes are performing at their peak is crucial. ELEKS Software Audit Services empowers you to navigate the challenges and seize the opportunities that lie within your software solutions. With an unbiased approach, we help you identify strengths and weaknesses, mitigate risks, and streamline your path to success. ELEKS Software Audit Services: Guiding Your Path to Excellence Identify Flaws in Your SDLC: Our unbiased evaluation scrutinizes your current products, internal processes, and documents to identify strengths, weaknesses, and potential risks within your Software Development Lifecycle (SDLC). With these insights, we pave the way for a fortified software solution that stands strong against challenges. Build the Ultimate Product: Rigorous QA testing subjects your product to industry-acknowledged standards including IEEE 829, ISO 29119, IEEE 730, and ISO 25010. Our unbiased framework maximizes efficiency and detects bottlenecks before launch, equipping your product with the robustness it needs to thrive. Speed to Market: Our meticulous software audit identifies bottlenecks and snags within your software, development, and testing processes. This optimization not only saves valuable time but also preserves your revenue streams, driving your product faster to market. Elevate Project Artifacts: Project documentation and software outputs undergo rigorous evaluation, enhancing business maturity and elevating your overall development process. With our insights, your software journey becomes a path towards continual improvement. Craft a Solid Action Plan: Through stringent diagnostics, we pinpoint issues in your project maturity and business analysis processes. Our collaboration results in a well-defined software action plan, optimizing efficiency and shaping a brighter future. Build a Roadmap for Success: Post-evaluation, we collaborate closely to create a resilient framework for your software operations. We offer continued support, ensuring your path forward is clear and confident. Minimize Post-Release Issues: Validating end-to-end application performance, we detect software defects before your product goes live. Proactive identification and resolution of defects safeguard your product's performance and uphold your brand reputation. ELEKS Software Audit Services: A Five-Step Excellence Framework Discovery: • Plan and prepare • Identify business needs and goals Analysis: • Collect and analyze data • Conduct interview sessions • Verify findings • Present and discuss findings Presentation: • Present findings and recommendations Implementation: • Co-create an action plan • Implement audit recommendations Control: • Follow-up on the action plan Empower Your Software Solutions: Development Process Audit: Evaluate the stability of every facet of your process framework, from development and release to project management, QA, and BA processes. Software Audit: Our experts conduct comprehensive diagnostics to assess the strength of your software solution, covering architecture, database, code quality, security, UI/UX, and more. Post-Audit: Receive a summary report detailing discrepancies, their severity, associated risks, and recommendations. Collaborate with us to craft a detailed action plan for issue resolution. ELEKS Software Audit Services: Your Gateway to Excellence With ELEKS Software Audit Services, your software solutions are fortified, risks are mitigated, and excellence is uncovered. Let us guide you through the labyrinth of software development, ensuring every line of code is a testament to your success. Elevate your software solutions with ELEKS, where excellence is not just a goal, but a guarantee.

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

The A-3™ LOK-SET™ packer combines advantages of a retrievable packer with the features of a permanent packer. An ability to lock down tubing forces makes the A-3 suitable for a broad range of applications, including production, injection, zone isolation, and remedial operations. The AL-2™ LOK-SET packer is similar to the A-3, and has a larger bore. To provide a simple and reliable injection system for retrieving an injection string without having to unseat the packer: L-10 or L-316 on-off sealing connectors, Product Family Nos. H68420 andH68422. Baker Hughes blanking plug can be used in the seating nipple proile ofthe on-off sealing connector to provide a means of plugging the lower zone whilethe tubing is being pulled. We can source from current stock or direct from the manufacturer.

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Enhancing Tubular Inspection Management with PipeDNA: Streamlining Quality Assurance in the Oil and Gas Industry In the oil and gas industry, ensuring the quality and integrity of tubular products is of paramount importance. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to effectively manage and streamline tubular inspection processes, enabling enhanced quality assurance and compliance. Efficient Management of Inspection Jobs: PipeDNA provides a comprehensive solution for managing inspection jobs across multiple sites. Stakeholders can easily create and track inspection jobs, monitor their status, and manage inspection profiles within the platform. This streamlined approach eliminates manual and time-consuming processes, ensuring efficient coordination and effective allocation of inspection resources. Real-time Job Status and Reporting: With PipeDNA, stakeholders can access real-time updates on the status of inspection jobs. The platform enables instant communication and collaboration between inspectors, supervisors, and other relevant parties involved in the inspection process. By providing a centralized hub for reporting and documentation, PipeDNA enhances transparency and allows for swift decision-making based on accurate and up-to-date information. Tailored Inspection Profiles: PipeDNA allows stakeholders to create and manage inspection profiles specific to their tubular products. Customizable inspection profiles enable stakeholders to define the required tests, measurements, and criteria for each type of tubular product. By tailoring inspection profiles to their unique needs, stakeholders can ensure adherence to industry standards and regulatory requirements, ultimately guaranteeing the quality and safety of their tubular assets. Seamless Integration of Inspection Data: PipeDNA offers seamless integration of inspection data, eliminating the need for manual data entry and reducing the risk of human errors. The platform allows for the integration of manufacturing data, ensuring that inspection results are directly linked to the production process. By automating the transfer of data, PipeDNA enables stakeholders to maintain accurate and reliable records, enhancing traceability and facilitating data-driven decision-making. Enhanced Identification and Traceability: PipeDNA's identification and traceability features provide stakeholders with quick and accurate pipe identification, detailed pipe information, activity history, and traceability documentation. By integrating popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables seamless identification and tracking of each tubular product. This enhanced traceability minimizes the risk of errors, supports efficient recalls if necessary, and ensures compliance with industry regulations. Leveraging Emerging Technologies: PipeDNA leverages today's emerging technologies to optimize tubular inspection management. The platform supports barcoding and labeling systems, integrating popular barcode standards for efficient identification and tracking. PipeDNA is RFID ready, allowing for integration with RFID technologies such as labels and asset tags, further enhancing asset tracking and traceability. Additionally, PipeDNA supports IoT data integrations using the MQTT standard, enabling fast and reliable sensor data integration for enhanced inspection processes. PipeDNA revolutionizes tubular inspection management in the oil and gas industry, providing a smart cloud-based platform that streamlines quality assurance processes. By offering efficient management of inspection jobs, real-time status updates, tailored inspection profiles, seamless data integration, and enhanced identification and traceability, PipeDNA empowers stakeholders to ensure the highest level of quality and compliance in their tubular assets. Embrace PipeDNA and elevate your tubular inspection management to new levels of efficiency and reliability.

Embrace Sustainability: Redefine Energy Management with ELEKS As the world shifts towards renewable energy sources, forward-thinking organizations are taking the lead in creating a more sustainable future. With ELEKS' software development expertise, you can navigate the path to sustainable energy solutions and significantly reduce your direct carbon footprint. Our innovative solutions empower you to embrace environmentally-friendly practices, encourage climate change awareness, and streamline energy management practices—all while cutting costs and enhancing your operational efficiency. Pioneering Sustainability with ELEKS Energy Software Development: Unlock the potential of an advanced energy management software solution that transforms your business power system into a beacon of sustainability, productivity, accessibility, and safety. Investment in Sustainable Energy Solutions: Our software development expertise guides you in making strategic investments in sustainable energy solutions, such as electric vehicles powered by emerging technologies. Join the ranks of industry leaders committed to building a greener future. Environmentally Friendly Energy Consumption: Cultivate a culture of environmentally-friendly energy consumption within your organization. Our solutions empower you to lead by example and inspire others to adopt sustainable practices. Climate Change Awareness: By embracing sustainable energy solutions, you're not only reducing your carbon footprint but also raising climate change awareness within your industry. Be a catalyst for positive change and inspire others to follow suit. Reduced Costs and Streamlined Practices: Sustainability doesn't just benefit the environment—it also benefits your bottom line. Our solutions help you streamline energy management practices, optimize processes, and reduce operational costs. ELEKS: Your Partner in Sustainability Decades of Expertise: With 30 years of experience in custom software development, ELEKS is a trusted partner in helping energy producers, distributors, and organizations optimize energy efficiency and drive sustainability. Cutting-Edge Solutions: Our software team is at the forefront of innovation, utilizing Cloud, IoT, blockchain, drones, and other cutting-edge technologies to design bespoke data-driven software solutions and energy management systems. Addressing Industry Challenges: We understand the unique challenges faced by the energy and utility industry. Our solutions are tailored to address the specific needs of various energy sources, facilities, and businesses. Embrace the Green Revolution with ELEKS ELEKS' software development expertise is your gateway to a sustainable future. By adopting eco-friendly energy solutions, you're not only reducing your carbon footprint but also contributing to a more sustainable world. Lead the way in your industry, inspire change, and partner with ELEKS to redefine energy management for a brighter future.

Introducing the MHA Motorhead Assembly from Marlin Oil Tools: A Comprehensive Downhole Solution for Coiled Tubing Operations in the Oil and Gas Industry Marlin Oil Tools is proud to present the MHA Motorhead Assembly, an innovative downhole tool designed to enhance the efficiency and safety of coiled tubing operations within the oil and gas sector. As a versatile component of the Bottom Hole Assembly (BHA), the MHA Motorhead Assembly is engineered to operate seamlessly with or without a motor, offering flexibility for a wide range of well intervention tasks. Featuring key components like the Back Pressure Valve (BPV), Hydraulic Disconnect (HDI), and Dual Circulation Sub (DCS), the MHA is your all-in-one solution for optimized downhole performance. Key Features of the MHA Motorhead Assembly: Versatile Use: Whether installed above a motor or run independently, the MHA provides critical functionality for well intervention operations. Comprehensive Assembly: Includes essential parts such as the BPV for well pressure control, the HDI for secure and efficient tool separation, and the DCS for enhanced fluid management. Enhanced Operational Safety: The inclusion of a Back Pressure Valve ensures controlled pressure conditions, minimizing the risk of blowouts or other well control issues. Reliable Disconnect Capability: The Hydraulic Disconnect allows for a swift and safe disengagement from the lower BHA components under challenging conditions, enhancing operational safety and flexibility. Improved Fluid Circulation: The Dual Circulation Sub enables operators to manage downhole fluid dynamics effectively, optimizing well cleaning and treatment processes. Elevate your coiled tubing operations with the MHA Motorhead Assembly from Marlin Oil Tools, a leading-edge downhole solution tailored for the oil and gas industry. Designed for versatility and efficiency, the MHA integrates critical components like the BPV, HDI, and DCS into a single assembly, streamlining your BHA configuration for various well intervention scenarios. Whether conducting well cleanouts, stimulations, or other interventions, the MHA Motorhead Assembly offers the reliability, safety, and performance necessary to achieve operational success. Opt for the MHA from Marlin Oil Tools for a comprehensive approach to downhole challenges. Why Choose the MHA Motorhead Assembly from Marlin Oil Tools? Operational Versatility: Adapts to different well intervention needs with or without a motor, ensuring broad application scope. Integrated Safety Features: Combines pressure control, secure disconnection, and fluid management into one assembly for enhanced safety. Streamlined BHA Integration: Simplifies the BHA setup, reducing the need for multiple tools and ensuring compatibility across operations. Enhanced Efficiency and Safety: Delivers improved operational outcomes with built-in safety mechanisms, minimizing risks and enhancing performance. The MHA Motorhead Assembly by Marlin Oil Tools represents the forefront of innovation in coiled tubing tool technology, providing operators with a versatile, safe, and efficient solution for maximizing well intervention results. Incorporate the MHA into your coiled tubing operations to ensure superior downhole performance and operational success.

A hydraulic cylinder is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end/head-end).

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.