Micro Hydro Turbine

Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionize Your Operations! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! StimStixx Technologies is proud to present our cutting-edge Thru-Tubing Acid Stimulation system, designed to meet all your needs with ease and precision. Our innovative product offers a hassle-free deployment process via electric wireline, ensuring a seamless integration into your operations. Available in both HCL and HCL/HF acid blends, our solution guarantees the utmost effectiveness in achieving your desired results. At the heart of our Thru-Tubing Acid Stimulation system lies a specially formulated solid acid stick. Whether you're using slickline, wireline, coil tubing, or tractor-conveyed methods, our solid acid stick delivers heated acid vapor with pinpoint accuracy directly to the zone of interest. This groundbreaking approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the heated acid vapor. Not only does our system deliver exceptional performance, but it also provides numerous benefits that will enhance your operations in more ways than one. By utilizing our Thru-Tubing Acid Stimulation, you'll experience reduced CO2 emissions, lower downtime, and simplified implementation. The increased precision and fast-acting nature of our solution will save you valuable time and resources, while also reducing manpower, rig, and equipment costs. Additionally, the elimination of contaminated effluent means a reduced risk of spills at the surface and eliminates the need for post-treatment clean-up or disposal. Join the countless businesses already benefiting from our Thru-Tubing Acid Stimulation system. Embrace efficiency, precision, and environmental responsibility with StimStixx Technologies. Contact us today to revolutionize your operations and unlock a new level of success!

Revolutionize Your Charging Experience with the Wisdom USB Charger Cord – Exclusively from Provix Provix is delighted to introduce the Wisdom USB Charger Cord, a uniquely designed and highly versatile charging solution for your lighting equipment. This self-designed magnetic USB charger is an epitome of convenience and efficiency, making it a must-have accessory for professionals and individuals alike. Innovative Magnetic USB Connectors The standout feature of this charger cord is its magnetic USB connectors. These connectors are specifically designed to easily and securely attach to your devices, ensuring a stable and reliable charging connection. This user-friendly design significantly simplifies the charging process, making it hassle-free. Flexible and Wide-Ranging Applications With a length of 1 meter, the Wisdom USB Charger Cord offers ample flexibility in various settings. Whether you're at home, in the office, a reading room, a hotel, or even in a vehicle, this charger cord extends the application field of your devices. Its versatility makes it suitable for any location with a power source or USB port. High-Quality Material for Durability Crafted from durable materials, the charger cord features a magnetic connector that guarantees longevity and consistent performance. The quality of construction ensures that the charger cord can withstand regular use in different environments. Simple and Efficient Charging Using the Wisdom USB Charger Cord is straightforward: 1. Connect the magnetic head with the multi-purpose lamp charging interface. 2. Connect the other end (USB connector) to a USB port for charging, or to an optional WISDOM power adapter (available separately) for enhanced flexibility. This easy-to-follow process ensures your devices are charged efficiently and ready for use whenever you need them. Elegant Design The charger cord's sleek white color not only adds an aesthetic touch but also makes it easy to locate among your gear. Its elegant design complements any setting, from professional environments to personal spaces. Ideal for Everyday Use Whether you need a reliable charging solution for your professional equipment or personal devices, the Wisdom USB Charger Cord is an excellent choice. Its combination of innovative design, ease of use, and versatility makes it a valuable addition to your tech accessories. Get Your Wisdom USB Charger Cord Today Experience the convenience and efficiency of the Wisdom USB Charger Cord. Available now at Provix, this charger cord is the perfect solution for keeping your devices powered and ready to go. Visit www.provix.net to learn more and make your purchase.

Ensure precise monitoring of liquid seal pressure, mud gas pressure, and mud temperature with the advanced HDI 3200 MGS Differential Monitoring System. Designed as a stand-alone, battery-powered solution, this monitoring system is specifically engineered to provide accurate readings and reliable performance in the most demanding environments. Unparalleled Accuracy and Reliability: At HDI, accuracy and reliability are at the core of everything we do. The HDI 3200 MGS system utilizes field-proven HDI Gauges, renowned for their precision and durability. With our system, you can trust that your pressure and temperature measurements are accurate and dependable, empowering you to make informed decisions and maintain optimal operational control. Detailed Monitoring and Differential Readings: The HDI 3200 MGS system goes beyond basic pressure and temperature measurements. It offers the unique capability to monitor the differential pressure between liquid seal and mud gas pressures, providing valuable insights into your well conditions. By accurately measuring the differential, you can gain a deeper understanding of the dynamics within your system, enabling you to make timely adjustments and optimize performance. Alternate Engineering Units for Versatile Applications: Flexibility is key in any monitoring system. With the HDI 3200 MGS, you can easily switch between engineering units to suit your specific needs. Whether you prefer PSI increments or an alternative unit of measurement, our system accommodates your requirements, ensuring compatibility with your existing workflows and standards. Seamless Integration and Secondary Output: The HDI 3200 MGS system offers seamless integration with local and remote visual displays, providing you with the flexibility to monitor and track readings from different locations. Additionally, the system features a 4-20mA secondary output, allowing for easy integration with other monitoring systems or data acquisition devices. This enables you to centralize your data and streamline your monitoring processes for enhanced efficiency. Depend on Houston Digital Instruments: With a legacy of excellence in measurement and control solutions, Houston Digital Instruments is a trusted partner in the industry. Our commitment to accuracy, reliability, and safety shines through in every product we develop. The HDI 3200 MGS Differential Monitoring System is a testament to our dedication to providing innovative solutions that meet the evolving needs of our customers. Experience the power of precision monitoring. Contact our knowledgeable team today to discuss your specific requirements and discover how the HDI 3200 MGS can revolutionize your operations. Trust Houston Digital Instruments for accurate, reliable, and efficient monitoring solutions. Where Precision Meets Performance - HDI, your partner in measurement excellence.

Streamlining Well Maintenance: InWaTec Combined’s Mini-Coil Services for Well Cleanouts In the pursuit of operational excellence within the oil and gas industry, well maintenance stands as a critical routine to ensure continued productivity and longevity of wells. InWaTec Combined’s Mini-Coil Services are specifically tailored for well cleanouts, offering a highly effective solution for the removal of debris and buildup that can impact well performance. Optimized Fluid Delivery: Our Mini-Coil Tubing is expertly designed for the precise placement of cleanout fluids, delivering them directly to the areas of buildup. This targeted approach is key to dissolving or dislodging blockages and ensuring a thorough well cleanout process. High-Pressure Cleaning: One of the standout features of our Mini-Coil Tubing is its ability to operate under much higher pumping pressures compared to standard tubing. This is particularly advantageous during well cleanouts where higher pressures can be required to remove stubborn or compacted debris. Efficiency in Production Lifting: Post-cleanout, it's often necessary to facilitate the well's return to optimal production levels. The Mini-Coil Tubing not only excels in delivering cleanout fluids but also in lifting wells back into production, making the transition from maintenance to output both seamless and efficient. Navigating Limitations: While the Mini-Coil Tubing may have limitations in terms of flow rate and snubbing capabilities due to its smaller size, InWaTec Combined has honed the application of this technology to maximize its benefits. Our experts are adept at customizing operations to work within these parameters while still achieving exceptional results. At InWaTec Combined, we understand that time is a precious commodity in well operations. Our Mini-Coil Services for well cleanouts are designed to minimize downtime, ensuring that maintenance is carried out swiftly and effectively, reducing the impact on production schedules. Our commitment to delivering innovative solutions is reflected in our Mini-Coil Services. We not only provide the tools but also the strategic expertise to ensure that every cleanout operation is a success. With InWaTec Combined, operators can rest assured that their wells will be maintained with the highest level of precision and care. Choose InWaTec Combined for your well cleanout needs and benefit from our advanced Mini-Coil Services. We bring to your operations a blend of precision, power, and efficiency that ensures your wells remain clean, clear, and productive. Let us partner with you to maintain the heartbeat of your well operations, ensuring uninterrupted flow and optimal performance.

Designed for the Extraordinary - Meet Maui ROV Are you ready to take your subsea operations to new heights? Introducing Maui ROV, the ultimate subsea solution designed with large payloads in mind. With its cutting-edge vectored thruster layout, professional Aluminum frame, and remarkable payload capacity, the Maui ROV stands out as a true game-changer in the industry. Mastering the Depths The Maui ROV is built to conquer challenging dives with ease, making it the ideal choice for survey work or heavy lifting tasks. Its impressive capabilities stem from the ingenious combination of design elements that result in unparalleled performance. Powerful Features for Unmatched Performance 1. Industrial Flight Computer and Linux User Interface: Powered by Mission Robotics, the Maui ROV features an industrial flight computer and user-friendly Linux interface, ensuring seamless control and precise maneuverability. 2. Topside Integrated Console: Equipped with a 22-inch sunlight-readable monitor and a hand controller, the Topside Integrated Console eliminates the need for additional equipment, streamlining your operations. 3. 6-Axis Stability and Fully Stabilized Mode: The Maui's ROV flight computer supports 6-axis stability, providing unmatched control and stability during underwater missions. 4. Exceptional Payload Space: Utilizing smaller diameter thrusters stacked vertically, the Maui ROV boasts exceptional payload space, enabling it to carry various instruments such as the Coda Octopus 3D Sonar, INS, Multibeam Profilers, or Sub Bottom Profilers. Experience the Specifications of Excellence Take a closer look at the impressive specifications that make the Maui ROV an indispensable asset for your subsea ventures: • Depth Rating: 400m • Dimensions: 725x465x425mm (LWH) • Weight in Air: 31.2kg • Payload Capacity (Fresh Water): 9.3kg • Payload Area: 610mm x 457mm • Thrusters: 8 lateral (45deg), 6 vertical • Ballard Pull: 27kg lateral, 28kg vertical • Top Speed: 3 knots • Video: 1080 HD IP camera with tilt • Aux Video: 2 HD camera inputs • Lights: 8x 1,500 Lumen each • Connectivity: 1x Ethernet, 4x Serial • Aux Power: 5/12/24/48VDC regulated Topside Integrated Console Specifications: • Output Voltage: 400VDC, 3kW • Input Voltage: 240VAC, 15A maximum • Monitor: 22in HD sunlight-readable • Case: Wheeled, 610x420x260mm, 24kg • Fully Isolated Output with LIM • Intel i5 PC with Windows 10 Installed • Aux HDMI Monitor Output Tether Specifications: • Breaking Strength: 250kg • Diameter: 9.1mm • Length: Up to 500m • Neutral in Fresh Water Explore the Depths with Maui ROV Unleash the power of heavy payloads and challenging dives with the Maui ROV. Let our state-of-the-art technology redefine your subsea operations and elevate your success.

Houston Digital Instruments (HDI Gauges) is proud to present the HDI 2000B Pressure Gauge System, an intrinsically safe and certified electronic gauge designed to provide accurate and reliable pressure measurements in various industries. With its solid-state platform and field-proven performance, the 2000B system offers exceptional safety, versatility, and low maintenance for users. Let's delve into the features and configurations of this cutting-edge pressure gauge system. Certified Accuracy and Safety: The HDI 2000B Pressure Gauge System is meticulously designed to meet rigorous industry standards. It is certified as intrinsically safe, Class 1, Division 1, Groups A, B, C, and D by CSA. For ATEX/IECEX certification, the gauge system measures pressure ranges up to 20,000 psi, while CSA certification is currently available up to 16,000 psi, with the 20,000 psi option becoming available later in 2023. Regardless of the certification level, all HDI pressure equipment guarantees an accuracy of 0.50% of full scale, ensuring precise measurements in demanding environments. Versatile Applications and Configurations: The HDI 2000B can be combined with a variety of sensor types, making it suitable for pressure, load, force, and torque applications across various industries. Whether you require primary or secondary display capabilities, the 2000B system offers flexible configurations to meet your specific needs. Slave and secondary display options are available, allowing you to extend visibility to multiple locations and optimize data monitoring and control. Reliable and Field Repairable: HDI believes in empowering users to maintain and repair their instruments easily. The 2000B Pressure Gauge System is battery-powered and field repairable, reducing downtime and spare unit inventory costs. Our DIY maintenance options enable you to quickly resolve issues, ensuring uninterrupted operation and minimizing the impact on your productivity. Additionally, the system includes a low battery indicator, providing timely notifications for battery replacement or recharging. Robust Features for Enhanced Performance: The HDI 2000B system is equipped with a range of features designed to enhance performance and usability. It offers pressure measurements from 30 psi up to 20,000 psi, with the option to request kPa or bar units. The system provides a high-resolution display with a 10 psi resolution, ensuring precise readings for critical applications. The solid-state platform eliminates the need for fluids or moving parts, resulting in consistent performance even in high vibration environments. An analog bar graph with a divided scale further enhances the readability of the gauge, enabling quick and accurate data interpretation. Wide Range of Configurations: To accommodate various requirements, the HDI 2000B Pressure Gauge System offers different output options. You can choose between a 4-20mA output (additional barrier required) or a 0-1 volt output, depending on your connectivity needs. The system also supports slave and secondary displays, allowing you to extend visibility and enhance data sharing across your operations. The HDI 2000B Pressure Gauge System stands as a reliable and accurate solution for demanding applications across industries. With its intrinsically safe certification, certified accuracy, and robust design, the 2000B system provides users with a dependable tool for precise pressure measurements. Its versatility, field repairability, and low maintenance requirements contribute to minimized downtime and enhanced operational efficiency. Contact HDI today to discuss your specific application requirements and experience the reliability and performance of the HDI 2000B Pressure Gauge System.

Introducing the Canaweld Premium All-Function Welding Helmet Series - Your Ultimate Welding Companion! When it comes to welding, safety is paramount. A high-quality welding helmet is not just a piece of equipment; it's a shield that protects welders from sparks, ultraviolet, and infrared light during the welding process. That's why we've created the Premium All-Function Welding Helmet Series - a state-of-the-art auto-tinting helmet that blends top-notch protection with hands-free ease of use. Experience True Protection - Auto-Tinting Technology: Our Premium All-Function Welding Helmet Series features auto-tinting technology that takes your safety to a whole new level. The photosensitive filter in the helmet automatically adjusts the viewing area to a pre-set shade before the light hits your eyes, offering instant protection. When your weld is complete, the viewing area "un-tints," allowing you to inspect your work without lifting the mask. This innovative design not only protects your eyes but also increases detection time, ensuring you weld with confidence. What Sets Us Apart - Top-Quality Features: When it comes to a high-quality welding helmet, we don't compromise. Here's what makes our Premium All-Function Welding Helmet Series stand out: 1. Lightning Fast Detection: With a detection time (tinting speed) of at least 1/20,000 of a second, your eyes are always shielded promptly. 2. Enhanced Protection: Equipped with four photo-sensitive sensors, our helmet guarantees maximum efficiency and exceptional protection. 3. Versatile Shade Settings: The helmet offers multiple shade settings, allowing you to use it for all welding processes in various light conditions. 4. Wide Viewing Area: The large viewing area ensures ease of use even in confined spaces, giving you an unobstructed view of your work. 5. Featherweight Design: We've crafted our helmet with a lightweight design to reduce neck fatigue during prolonged use, keeping you comfortable and focused. 6. Reliable Power: The solar cell, combined with two replaceable CR2032 lithium batteries, ensures your helmet never runs out of juice. Our Premium All-Function Welding Helmet Series goes above and beyond to deliver top-tier features: • Infinitely adjustable sensitivity control for personalized protection. • Constant UV/IR protection with Shade DIN16 at all times. • External dark to light delay adjustment from 0.1 to 1.0 seconds. • Low amperage TIG welding compatibility for added versatility. • Grinding function and low volume alarm for added convenience. • Superior optical clarity for crystal-clear vision during welding. • ADF self-check ensures the helmet's integrity before use. Built to Last - Certified Excellence: At Canaweld, we take quality seriously. Our Premium All-Function Welding Helmet Series complies with CAN/CSA Z94.3 – 07 (R2014) standards, ensuring you get a product that meets the highest safety and performance requirements. Elevate Your Welding Experience - Choose Canaweld's Premium All-Function Welding Helmet Series!

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required.

As the oil, gas, and geothermal industries continue to grow, the risk of contamination from Naturally Occurring Radioactive Material (NORM) also increases. That's why Cleanstream is proud to introduce our innovative, qualitative, and rapid cleaning services for Low Specific Activity (LSA) and NORM contamination. Our advanced cleaning methods comply with LSA/NORM regulations, ensuring safety for people and the environment. We invest heavily in new methods to continuously guarantee quality. Our own radiation experts, at Radiation Protection Expert (RPE) and Radiation Protection Officer (RPO) level, always carry out the decontamination and final release. At Cleanstream, we understand the importance of cleaning without damage. That's why we've developed our own inventive cleaning methods to prevent materials from getting damaged during the cleaning process. Our experienced employees have extensive knowledge of decontamination and are involved in disassembling and decontaminating contaminated materials originating from oil and gas wells so that the metal can be recycled. Our services are both rapid and cost-effective. Because all work activities are carried out by our own staff at our 20,000 m2 premises in Ter Apel, the communication lines and turnaround times are short, resulting in considerable cost-savings for our clients. Cleanstream is licensed to clean all types of NORM/LSA contaminated materials. Cleaned objects are released by means of a certificate, showing that your material has been cleaned in accordance with laws and regulations. At Cleanstream, we are committed to embracing change and constantly improving to meet the demand. Join us in our mission to promote safety, quality, and green solutions. Contact us today to experience our innovative and efficient cleaning services for NORM/LSA contaminated materials.

Precision Chemical Stimulation with InWaTec Combined’s Mini-Coil Services In the realm of enhancing well productivity, chemical stimulation stands as a cornerstone technique, vital for improving hydrocarbon flow from reservoir to surface. InWaTec Combined proudly offers Mini-Coil Services, a highly specialized approach to chemical stimulation that addresses the need for precise fluid placement and robust performance under high pressures. Our Mini-Coil Tubing is the ideal conduit for delivering stimulation fluids in exact quantities directly to the target zones within the well. This precise delivery is critical for the effectiveness of chemical treatments, ensuring that every drop of stimulating fluid is utilized to its maximum potential. Advantages of Mini-Coil Tubing in Chemical Stimulation: High-Pressure Capability: The smaller diameter of our Mini-Coil Tubing allows for operations at significantly higher pumping pressures compared to traditional coiled tubing. This is particularly advantageous during chemical stimulation, where certain treatments require the application of fluids under substantial pressure to achieve optimal penetration and reaction within the reservoir. Precision in Fluid Placement: The precise placement of stimulation chemicals is crucial for the success of any treatment. Our Mini-Coil Tubing services ensure that the stimulation fluids are deposited exactly where needed, which is particularly beneficial in complex reservoirs or when targeting specific formation layers. Efficient Well Lifting: Post-stimulation, wells often require assistance to commence or resume production. The Mini-Coil Tubing is not only perfect for fluid delivery but also for well lifting operations, facilitating the transition from treatment to production smoothly and effectively. Tailored Operations: Understanding that flow rates and snubbing force are aspects where Mini-Coil Tubing has limitations, InWaTec Combined has optimized the design and operation of our Mini-Coil Services to maximize their strengths. Our team of experts can adjust operations to suit the specific conditions and requirements of each well, ensuring that the limitations are mitigated and the advantages are fully leveraged. InWaTec Combined’s Mini-Coil Services represent a fusion of innovation, precision, and efficiency. We bring this triad to every chemical stimulation project, ensuring that our clients' wells receive the most meticulous and effective treatment possible. By choosing InWaTec Combined for your chemical stimulation needs, you are opting for a partner dedicated to enhancing your well performance with cutting-edge solutions. Our Mini-Coil Services are a testament to our commitment to pushing the boundaries of what is possible in well intervention and stimulation. Experience the difference with InWaTec Combined’s Mini-Coil Services—where small-scale delivery meets large-scale impact, driving your wells towards maximum productivity.

Introducing the Kessels MS-152 Multistage Steam Turbine: Unleash Unprecedented Power and Efficiency In the fast-paced world of the oil and gas industry, where precision, performance, and reliability are paramount, Kessels Steam Turbines proudly presents the MS-152 Multistage Steam Turbine. This engineering marvel is poised to redefine excellence in steam turbine technology, delivering unmatched power and efficiency. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and the MS-152 takes them to an entirely new level. Available in both single-stage and multi-stage options, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency Beyond Imagination At the heart of the MS-152 Multistage Steam Turbine is the essence of back pressure turbines – the straight-back pressure design. This innovative engineering ensures the seamless harnessing of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Limits Our MS-152 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-152 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-152 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-152 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

At Cleanstream, we understand the importance of using safe, green and environmentally friendly chemicals for cleaning, de-rusting, and protecting any kind of reusable and/or precious objects and property. That's why we supply a range of pH-neutral, safe and innovative cleaning solutions that comply with environmental regulations and minimize the impact on the environment. Our products are designed to provide you with a reliable and efficient solution to your cleaning needs, while ensuring the safety of your staff and the environment. We offer a variety of solutions for cleaning, descaling and protecting metal tools, pipes, installations, boilers, heat exchangers, pump systems and more. Our solutions are effective, yet safe for hands, skin and the environment. In addition, we also provide strong solvents for cleaning sulphate deposits in geothermal, oil and gas wells, mid and downstream installations and systems. Our innovative acid substitutes are perfect for the stimulation of geothermal, oil and gas wells. What sets us apart is our commitment to providing green solutions that are also effective. Our products are certified to be environmentally friendly, effective and comply with all relevant regulations. Our certifications include CEFAS, HOCNF Certificate (Harmonized Offshore Chemical Notification Format), and REACH documentation (Registration, Evaluation and Authorization of Chemicals: European legislation for registration, evaluation and authorization of chemicals). At Cleanstream, we are proud to be your green partner in the industry. We continuously research and develop new and innovative products to provide the best and most efficient solutions for our clients while also ensuring the protection of the environment. Trust Cleanstream to provide you with safe, effective and environmentally friendly cleaning solutions. Contact us today to find out more about our products and services.

Unleashing the Full Potential of the Lanai ROV with Poseidon M0020 Backplates At Poseidon Robotics, we are dedicated to pushing the boundaries of subsea exploration and empowering our customers with the most advanced and field-friendly tools. Our latest innovation, the Poseidon M0020 backplate, takes the capabilities of our Lanai ROV to new heights, offering a versatile and efficient solution for all your underwater missions. Designed for Field-Friendly Operations When it comes to subsea operations, ease of use and adaptability are paramount. We understand the challenges our customers face in the field, which is why we developed the Poseidon M0020 backplate with their needs in mind. Our team of experts meticulously engineered this backplate to optimize its performance and enhance the overall ROV experience. Unrivaled Connectivity and Expandability The Poseidon M0020 backplate is a feat of engineering, incorporating a carefully planned configuration that includes multiple threaded locations to accommodate various connectors, sensors, and accessories. With 8 locations threaded for 7/16-20 connectors, 7 locations threaded for M10 sensors, and a small M6 location for lights, this backplate opens up a world of possibilities for customization and expansion. Enhanced Functionality with Manipulators and Accessories We designed the M0020 backplate to provide optimal support for a grabber, such as the BLUEPRINTLAB Reach Alpha, and two auxiliary ports for accessories like sonar, USBL, or mini-SVX. This flexibility allows you to tailor the Lanai ROV precisely to your mission requirements, ensuring that you have the right tools at your disposal to get the job done efficiently and effectively. Durable Construction for Deep-Water Missions The Poseidon M0020 backplate is crafted from 7075 Aluminum, renowned for its exceptional strength and durability. This material not only ensures that the backplate can withstand the rigors of challenging subsea environments but also provides a depth rating in excess of 500 meters. With the M0020 backplate, you can explore deeper and reach areas that were previously beyond your grasp. Seamless Integration with Lanai ROV The M0020 backplate is designed specifically for the Lanai ROV, ensuring a perfect fit and seamless integration. As with all our products, the backplate undergoes rigorous testing and quality assurance procedures to meet our stringent standards. When you choose Poseidon Robotics, you can be confident that every component is engineered with precision and dedication to excellence. Elevate Your Subsea Missions with Poseidon Robotics Our Poseidon M0020 backplate is just one example of our commitment to providing innovative solutions that empower our customers to achieve their goals in subsea exploration. Whether you are conducting scientific research, performing complex inspections, or participating in search and rescue operations, our technology equips you with the tools you need to excel in your mission. Discover the Possibilities Today Explore the limitless possibilities that the Poseidon M0020 backplate brings to your Lanai ROV. Take your subsea operations to new depths and expand your capabilities with ease. Get in touch with Poseidon Robotics today to learn more about our advanced backplate and how it can revolutionize your underwater missions. Choose Poseidon Robotics for Unmatched Performance As the premier provider of subsea robotics and ROV solutions, Poseidon Robotics stands as a trusted partner to professionals worldwide. Our dedication to innovation, quality, and customer satisfaction sets us apart, and we are ready to join you on your journey of discovery beneath the waves. Let us be your guide to unlocking the hidden wonders of the deep ocean.

Introducing Sivam's Sand Trap: The Ultimate Solution for Sand Separation in the Oil and Gas Industry! Our innovative sand separation technology is designed to improve the efficiency and performance of oil and gas operations by effectively removing sand from production streams. Sivam's Sand Trap is a game-changer in the oil and gas industry. Our cutting-edge technology works by changing the flow parameters, reducing the flow velocities to the point where the sand drops out while gas and fluids are carried through. This process involves no bags, filters, screens, and virtually no pressure drop, making it the most efficient and cost-effective solution for sand separation on the market. Our Sand Trap is designed with durability and reliability in mind. It can handle high flow rates and is built to withstand harsh conditions, ensuring optimal performance even in the most challenging environments. And with no moving parts, it requires minimal maintenance, reducing downtime and operating costs. One of the key benefits of Sivam's Sand Trap is its versatility. It can be used in a variety of applications, from primary production to enhanced recovery, and can be customized to meet the specific needs of your operation. And with its compact design, it can be easily installed and integrated into your existing system. At Sivam, we pride ourselves on providing exceptional customer service and support. Our team of experts is always available to assist you with any questions or concerns you may have, ensuring that you get the most out of your Sand Trap. Overall, Sivam's Sand Trap is the ultimate solution for sand separation in the oil and gas industry. With its cutting-edge technology, versatility, and efficiency, you can trust that our Sand Trap will exceed your expectations. Contact us today to learn more about how Sivam's Sand Trap can benefit your business.

An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue.

Achieve Precision and Perfection with the TIG AC/DC 201 Pulse D Welding Machine At Canaweld, we understand that precision and sleek design are paramount when it comes to welding in industries like marine, aerospace, and medical. That's why our wide range of TIG welders is meticulously designed to provide you with the utmost control necessary to achieve professional results with various parent metals. When excellence is your standard, trust Canaweld to deliver the welding solutions you need. Introducing the TIG AC/DC 201 Pulse D - Your Powerful Ally The TIG AC/DC 201 Pulse D stands as a powerful, portable, and versatile welding machine that embodies innovation and excellence. Capable of both AC and DC TIG welding on stainless steel, mild steel, and aluminum, as well as Stick welding, this unit offers unmatched versatility for welders who demand the best. The Pulse of Precision Welding The pulse features of the TIG AC/DC 201 Pulse D, combined with the HF start, make it the ultimate choice for welders seeking high-quality TIG welds, even on the thinnest materials, without any distortion. This machine sets new standards in welding performance, empowering you to tackle challenging projects with confidence and finesse. Exemplary Features for Superior Results The TIG AC/DC 201 Pulse D is equipped with an array of features that elevate your welding experience: • AC/DC capabilities, including all pulse parameters of a TIG welding machine, offering maximum versatility for various welding tasks. • Rigorously tested in (104°F/40°C) to ensure optimal performance even in the toughest conditions, so you can weld with confidence in any environment. • Excellent welding quality on aluminum, stainless steel, and other materials, providing professional-grade results every time. • The ability to weld very thin materials, especially aluminum, with precision and without compromising on quality. • Digital control of all welding parameters, including pre-flow, starting current, slope-up, welding current, base current, pulse duration, pulse frequency, slope-down, crater arc current, post-flow, AC frequency, AC balance, and more, giving you complete control over your welding process. • Generator compatible design for flexibility and adaptability in various worksites. • Excellent welding characteristics in Stick mode with the most common rod in the market, adding versatility to your welding tasks. • Digital ammeter and Hold Function of the last read value, ensuring accurate parameter monitoring and adjustment. • Automatic fan ensuring protection against overheating, saving energy, and keeping dust and debris away from the machine, enhancing its durability and performance. • Adjustable Arc Force in Stick mode, allowing you to fine-tune your welding experience for exceptional results. • Durable metal face panel, ensuring longevity and safeguarding your investment. Your Welding Excellence, Our Commitment At Canaweld, we stand by the quality and reliability of our products. That's why the TIG AC/DC 201 Pulse D comes with a comprehensive 3-year warranty, providing you with peace of mind and assurance in your welding endeavors. Elevate Your Welding Standards with Canaweld The TIG AC/DC 201 Pulse D is the epitome of precision and perfection in welding. Whether you work in the marine, aerospace, or medical industries or any other field where precision is crucial, this welding machine will exceed your expectations and deliver superior results. Invest in the welding machine that empowers you to achieve greatness. Choose the TIG AC/DC 201 Pulse D from Canaweld and experience welding like never before. Experience the pulse of precision welding and elevate your welding projects to new heights. Trust Canaweld for welding excellence. Make the TIG AC/DC 201 Pulse D your welding ally today. Unleash the power of precision welding with Canaweld.

The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog.

Unveiling Subsurface Precision: InWaTec Combined's PMIT Services for Optimal Wellbore Assessment In the ever-evolving landscape of the oil and gas industry, the quest for precision in subsurface analysis is relentless. InWaTec Combined's Platform Multifinger Imaging Tool (PMIT) Services stand at the forefront of this quest, offering unparalleled accuracy in the radial measurement of tubing and casing strings' internal diameters. The PMIT is an innovation par excellence, a multifinger caliper tool that delves into the heart of the wellbore to capture highly precise data. This tool is not just a measuring device; it is the embodiment of accuracy and technological sophistication. With its multiple sensor fingers, the PMIT glides along the tubing or casing surface, meticulously logging variations in the internal diameter that could indicate potential issues such as corrosion, wear, or deformation. Our PMIT services are crucial for ensuring the integrity and performance of downhole tubulars. With its ability to provide a 360-degree internal view, the PMIT helps operators make informed decisions about maintenance, workover needs, and overall well management. The accuracy of the PMIT’s measurements allows for the early detection of anomalies that, if left unchecked, could lead to operational failures or safety hazards. At InWaTec Combined, we believe that a thorough understanding of the wellbore condition is essential for the longevity and productivity of wells. Our PMIT Services deliver this understanding through detailed assessments that support proactive intervention strategies. The data gathered by the PMIT facilitates accurate planning for remedial operations, ensuring that any service performed is targeted and effective. In an industry where the margin for error is increasingly narrow, the PMIT offers a significant advantage. Operators can trust the data from our PMIT Services to reflect the true conditions within their wells, providing a solid foundation for all subsequent operational decisions. Choose InWaTec Combined's PMIT Services for your wellbore assessment needs, and experience the confidence that comes from precision technology and detailed, actionable data. Our commitment is to provide you with the insights necessary to maintain the highest standards of well integrity and performance. With InWaTec Combined, you are not just measuring the depths—you are mastering them.