5.5 inch Depthstar Surface Controlled Subsurface Safety Valve

Introducing the new multi-trip stackable STX-SPAN version from ID OILTOOLS! This cutting-edge system is the perfect solution for isolating longer intervals in flowing or static wells. With the ability to be deployed on wire line, slick line, coil tubing or conventional tubing, the STX-SPAN is versatile and can be used in a variety of applications. The STX-SPAN is also ideal for wells with limited rig up height and on wells that have severe dog legs where only short sections will pass. Each section seals to the previous one via a ratchet latch stinger and seal bore receptacle, making it easy to use and efficient. Our stackable X-SPAN products allow for long straddle systems to be deployed in multiple runs, making it perfect for when lubricator length or well accessibility is an issue. With the ability to isolate the top and bottom of the intended zone using X-SPAN or GTX-SPAN elements, this technology allows for extremely long isolation systems to be deployed. Additionally, specially engineered seal assemblies are utilized between each sequential intermediate section for added reliability. The STX-SPAN can incorporate standard off-the-shelf customer supplied tubulars as straddle base pipe material, and can incorporate sand screens, slotted liner, flow control devices such as profile nipples and sliding sleeves. It is also rated for high pressure and high temperature applications, making it perfect for a variety of environments. So, if you're looking for a versatile, reliable, and easy-to-use system for isolating longer intervals in your wells, look no further than the STX-SPAN from ID OILTOOLS! Contact our Tech Services department for assistance and more information on this game-changing product.

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.

Streamline Drill Pipe Management with PipeDNA: Enhancing Efficiency and Visibility on the Drilling Rig Efficient management of drill pipe is a critical factor in ensuring smooth drilling operations in the oil and gas industry. Introducing PipeDNA, a smart new platform designed to revolutionize the way drill pipe is managed on the drilling rig. With its cloud-based solution and powerful features, PipeDNA empowers drilling contractors, oilfield rental companies, and oilfield services providers to proactively manage their drill pipe inventory, increase visibility, and optimize their drilling operations. Full Inventory Management and Tracking: PipeDNA offers a comprehensive set of features that enable drill pipe stakeholders to gain complete control over their inventory. With its inventory management and tracking capabilities, PipeDNA provides real-time information on drill pipe utilization, activity, and trends. This invaluable insight allows drilling contractors to make informed decisions regarding drill pipe allocation, maintenance schedules, and resource optimization. Efficient Logistics Management: Managing logistics operations on the drilling rig can be complex and time-consuming. PipeDNA simplifies this process by offering robust logistics management functionalities. Users can efficiently handle shipments, track the status of drill pipe deliveries, manage documentation, and even bundle pipes for streamlined transportation. With PipeDNA, logistics become a well-coordinated and seamless aspect of drill pipe management, saving time and resources. Streamlined Inspection Management: Inspection is crucial for ensuring the integrity and safety of drill pipe. PipeDNA's inspection management feature enables users to efficiently manage inspection jobs across multiple sites, track job statuses, and maintain inspection profiles. This capability ensures that inspections are conducted in a timely manner, minimizing downtime and optimizing drilling operations. Automated Tally Operations: Pipe tallying is a time-consuming task prone to human errors when done manually. PipeDNA simplifies tally operations by providing users with the ability to create and manage tally operations. Automated workflows streamline the tallying process, reducing errors and saving valuable time. By automating tally operations, PipeDNA allows drill pipe stakeholders to focus on more critical aspects of their drilling operations. Enhanced Identification and Traceability: Quick and accurate identification of drill pipe assets is crucial for efficient drilling operations. PipeDNA offers a robust identification and traceability system that provides users with comprehensive drill pipe details, activity history, and traceability documentation. With PipeDNA, drill pipe stakeholders can quickly locate and track specific pipes, ensuring smooth operations and minimizing the risk of errors. Support for Various Drill Pipe Types: PipeDNA's innovative technology is designed to accommodate various types of drill pipe, providing flexibility and adaptability. The platform supports the management of new and premium drill pipe, conventional and spiral HWDP (Heavy Weight Drill Pipe), landing strings, and drilling risers. Whether it's EUE or NUE tubing, workover strings, slick or spiral drill collars, or API 6A flanges, PipeDNA can efficiently manage a wide range of drill pipe and tube types, catering to the diverse needs of the drilling industry. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's popular and emerging technologies to streamline workflows and digitize drill pipe management processes. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, facilitating seamless identification and tracking. PipeDNA is also RFID-ready, providing integration support for RFID technologies, including labels and asset tags. Furthermore, the platform supports IoT data integration using the MQTT standard, allowing fast and efficient integration of sensor data. PipeDNA is transforming drill pipe management on the drilling rig, offering a cloud-based platform that enhances efficiency, increases visibility, and optimizes drilling operations. With its powerful features, seamless integrations, and innovative technology, PipeDNA empowers drilling contractors, rental companies, and oilfield services providers to proactively manage their drill pipe inventory, reduce costs, and improve overall performance. Streamline your drill pipe management processes with PipeDNA and elevate your drilling operations to new heights of productivity and success.

Introducing the MIG/STICK 202: Your Versatile Welding Companion for Oil and Gas Industry When it comes to MIG welding machines that deliver unmatched performance and precision, Canaweld is the name you can trust. Our high-performance MIG welders are designed to tackle the toughest welding jobs in the oil and gas industry, offering a wide range of durable MIG welders, industrial heavy-duty MIG welders, high-tech MIG pulse welders, and portable MIG welders to suit your needs. The Ultimate Welding Solution Canaweld MIG welding machines are not just powerful; they are versatile too. Whether you need to perform Flux-cored or Flux-cored gasless welding or MIG Brazing, our machines have got you covered. Designed for speed, ease of use, and cost savings, our MIG welders are engineered to handle various materials, including mild steel, stainless steel, aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys. Precision and Durability in Every Weld The MIG/STICK 202 is the epitome of portability, power, and versatility in welding. This unit is capable of welding up to 3/8-inch steel in either MIG mode or SMAW setting, providing you with the flexibility to tackle light to medium-duty welding jobs effortlessly. With the ability to run 0.023–0.045-inch MIG wire or up to 3/16-inch SMAW rods with a stable arc, this welding machine delivers exceptional results with every weld. Outstanding Features to Boost Your Productivity At Canaweld, we prioritize your welding experience. That's why the MIG/STICK 202 is equipped with an array of features that set it apart from the rest: • High power output: Enjoy 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, giving you the power you need for demanding welding tasks. • Tested for the toughest conditions: The machine has been rigorously tested in extreme temperatures of 104°F /40°C to ensure optimal performance in any environment. • Inverter power source: The MIG/STICK 202 boasts an inverter power source with optimal welding characteristics in both MIG and Stick modes. • Power fluctuations compensation: The automatic compensation for main power fluctuations within ± 20% ensures a stable and consistent welding process. • Long-distance welding capability: With the ability to use up to 165 feet (50 meters) leads without any power loss at the weld, you can tackle distant welding projects effortlessly. • Precise wire feed: The high-grade metal dual drive roll system ensures precise and constant wire feed, preventing bird nesting and improving efficiency. • Wide welding range: Weld up to 3/8” steel and aluminum with ease, making it suitable for a wide range of applications. • Graduated knob for accuracy: Achieve the most accurate settings with the graduated knob, giving you full control over your welding process. • Stable arc with minimal spatter: The MIG/STICK 202 automatically controls wire speed by voltage feedback, resulting in an extremely stable arc with minimal spatter. • Reliable cooling and protection: Fan-cooled and thermally protected against overheating, this welding machine ensures longevity and durability. • Built-in polarity changeover: Easily switch between common gas and gasless wires with the built-in polarity changeover feature. • User-friendly design: The metal face panel adds durability, while the spool gun compatibility and support for both 8 and 12-inch wire spool sizes enhance convenience. • Comprehensive warranty: Enjoy peace of mind with our comprehensive 3-year warranty, knowing that your investment is protected. Experience Welding Excellence with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld delivers superior performance, precision, and durability. Invest in the MIG/STICK 202 and take your welding capabilities to new heights. With Canaweld's commitment to quality and customer satisfaction, you're choosing a welding companion that will exceed your expectations. Unlock your welding potential with Canaweld. Experience the future of welding technology and achieve exceptional results with the MIG/STICK 202.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

Enhance Your Visual Capabilities with Camera Equipment Leasing from CWB National Leasing Capturing Success with Advanced and Flexible Photographic Solutions For businesses in the fields of photography, filmmaking, marketing, or any industry requiring high-quality visual content, state-of-the-art camera equipment is essential. Leasing camera equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and intelligent solution for businesses seeking to elevate their visual production quality. Here’s how leasing camera equipment can benefit your business: 1. Rapid Access to Professional Camera Gear Understanding the dynamic nature of visual content creation, CWB National Leasing offers a swift leasing process. Decisions are typically made within 48 hours of application, ensuring that your camera equipment can be delivered and operational quickly. This prompt service allows you to stay ahead in the fast-paced world of digital content. 2. Increased Financial Flexibility Leasing camera equipment with CWB National Leasing enhances your financial power. It allows you to spread costs over manageable periodic payments instead of a substantial initial purchase, freeing up capital for other essential business operations. The option to add extra features or accessories to your camera equipment for a small payment increase enables customization to meet specific project needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your camera equipment starts contributing to your business’s productivity while still being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is especially beneficial for businesses with variable or seasonal projects, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing camera equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Choosing to lease camera equipment through CWB National Leasing is a strategic decision that provides your business with the latest in photographic technology while maintaining financial agility. It ensures access to top-tier camera gear, vital for producing high-quality visual content, without the financial burden of a large upfront investment. This leasing approach enables enhanced creative capabilities, improved content quality, and increased competitiveness in the visual media market.

Simplify Your Charging with the Wisdom USB Adapter – A Smart Solution from Provix Provix is excited to unveil the Wisdom USB Adapter, a cutting-edge charging accessory designed to enhance your charging experience. This magnetic USB charger features self-designed connectors that redefine convenience and efficiency in powering your devices. Innovative Magnetic USB Connectors The USB Adapter boasts unique magnetic USB connectors, specifically engineered for a seamless and secure connection. This design allows for quick and effortless attachment to your devices, ensuring a stable and consistent charge. The user-friendly nature of these connectors makes the charging process incredibly simple, even in less-than-ideal conditions or tight spaces. Versatile for Various Environments The Wisdom USB Adapter is designed to extend your charging capabilities across multiple settings. Whether you're at home, in the office, a hotel, or on the go, this adapter provides a reliable charging solution. Its white color and sleek design add a touch of elegance to your tech collection, making it a stylish and practical choice. Durable and High-Quality Construction Crafted with a focus on durability, the USB Adapter features a high-quality magnetic connector and a robust connecting cable. With a cable length of 1 meter, it offers the flexibility and reach needed in various charging situations. Effortless Charging Process Using the Wisdom USB Adapter is straightforward and efficient: 1. Connect the magnetic head to the multi-purpose lamp's charging interface. 2. Attach the USB connector end to a WISDOM power adapter or any standard USB port. This simple two-step process ensures your devices are charged without any hassle, keeping them ready for use whenever you need them. Ideal for Modern Professionals The Wisdom USB Adapter is a perfect match for professionals who require a reliable and efficient charging solution for their equipment. Its compatibility with various devices and ease of use make it an indispensable tool for miners, construction workers, and outdoor enthusiasts. Get Your Wisdom USB Adapter Today Embrace the convenience of the Wisdom USB Adapter, available now at Provix. Visit our website at www.provix.net to discover more about this innovative charging solution and explore our range of high-quality mining and construction equipment. Stay charged and ready with Wisdom's advanced technology.

Revolutionize Cementing and Acidizing Operations with HOCA Oil Tools' Dump Bailers In the dynamic and challenging environment of downhole operations, the need for precise, efficient, and reliable tools has never been greater. HOCA Oil Tools, a pioneer in downhole slick line technology, is at the forefront of this demand with its state-of-the-art Dump Bailers. Specifically designed for targeted applications such as cementing and acidizing, these tools play a pivotal role in enhancing well integrity and performance. HOCA Dump Bailers: Precision in Every Drop Our Dump Bailers are engineered to deliver materials like cement, acids, or other substances directly to the required downhole location with utmost precision. Constructed from durable materials resistant to harsh chemicals and high pressures, HOCA's Dump Bailers ensure that even the most demanding downhole conditions can be tackled with confidence and control. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities and demands of modern oil and gas extraction. Our Dump Bailers are designed with this understanding at their core, providing innovative solutions that address the specific needs of downhole operations. By integrating our tools into your operations, you gain access to a level of precision, efficiency, and reliability that sets new industry standards. Invest in HOCA's Dump Bailers to leverage their benefits in your downhole operations. Whether you are executing precise cement plugs, combating downhole leaks, or enhancing production through acidization, our tools provide the solutions you need to achieve optimal results. Discover the difference that HOCA Oil Tools can make in your downhole operations. With our commitment to quality, innovation, and customer service, we provide not just tools, but comprehensive downhole solutions that drive your success. Join the ranks of satisfied clients who have experienced the transformative impact of HOCA’s Dump Bailers in their operations. Choose HOCA Oil Tools for unparalleled downhole solutions that elevate your operational efficiency, safety, and success.

Just like a hose you might use to water your garden, the purpose of a hydraulic hose is to allow fluid to flow from one component to another – in this case hydraulic fluid. The hose is the conduit that ensures the fluid is able to travel unimpeded and it's a vital part of keeping hydraulics systems moving. A hydraulic hose is used anywhere in a hydraulic system requiring a flexible connection between two fluid ports. A hydraulic hose is a synthetic rubber tube surrounded by some sort of flexible strength enhancing winding, such as metal or fiber, and then covered in another rubber carcass. Flow velocity is determined by both the hydraulic pump's flow rate and the hydraulic hose size. Changing the flow rate of the hydraulic pump but leaving the hydraulic hose size the same will affect flow velocity. Standard high pressure hydraulic hose 1SN can in -40°C to +100°C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar.

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog.

OCTG (Oil Country Tubular Goods) refers to the piping products that are used in oil and gas production and drilling activities. OCTG pipe normally is manufactured based on API specifications. Oil country tubular goods (OCTG) is a family of seamless rolled products consisting of drill pipe, casing and tubing subjected to loading conditions according to their specific application. Tubing is the pipe placed in the well that is exposed to flowing fluids from the reservoir to surface. It is uncemented and able to pulled and replaced in the event the pipe erodes or corrodes. Our international network of manufacturers and warehouses have almost all weights and grades in stock.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Introducing the Revolutionary IRC (Internal Roll-on Connector) by Marlin Oil Tools: Your Key to Efficient and Reliable Coiled Tubing Connections in the Oil and Gas Industry Marlin Oil Tools proudly presents the IRC (Internal Roll-on Connector), a cutting-edge solution engineered to enhance the efficiency and reliability of well intervention operations. Designed to seamlessly connect the smooth lower end of coiled tubing (CT) to any downhole tool, the IRC stands out for its innovative design and superior performance in the demanding environments of the oil and gas industry. Here's why the IRC is an essential tool for your well intervention operations. Key Features of the IRC (Internal Roll-on Connector): Innovative Groove Design: The IRC features unique grooves in its upper part, which are specifically designed for the secure fixing of coiled tubing through a rolling process. This design ensures a tight and reliable connection, crucial for the successful execution of well intervention tasks. Threaded Lower Part for Versatile Tool Attachment: Equipped with a threaded lower section, the IRC allows for easy and secure attachment of various downhole tools. This feature provides the versatility needed to adapt to different operational requirements, making the IRC a versatile tool in your well intervention toolkit. Enhanced Sealing with FKM 90 O-rings: To ensure the integrity of well operations, the IRC is fitted with two O-rings made from the high-quality FKM 90 material. This offers superior sealing capabilities, effectively isolating the connector's internal space from the annulus and preventing fluid leakage. Efficient Installation Process: The installation of the IRC is simplified and efficient, utilizing a mechanical tubing cutter with rolling wheels. This process not only ensures a secure connection but also minimizes downtime, allowing for quicker setup and transition between operations. Elevate your well intervention operations with the IRC (Internal Roll-on Connector) from Marlin Oil Tools, a leading innovator in coiled tubing technology for the oil and gas sector. Designed for the secure connection of coiled tubing to downhole tools, the IRC features a unique groove design for rolling fixation and a threaded lower part for versatile tool attachment. Equipped with dual O-rings made from durable FKM 90 material, it provides exceptional sealing, enhancing operational integrity. The IRC is engineered for easy installation, offering efficiency and reliability in well intervention tasks. Choose the IRC for a seamless, leak-proof connection in your coiled tubing operations. Why Choose the IRC from Marlin Oil Tools? Secure and Reliable Connection: The unique groove design ensures a robust connection between coiled tubing and downhole tools, critical for the success of well intervention operations. Operational Versatility: The threaded lower part enhances the IRC's compatibility with a wide range of downhole tools, offering operational flexibility. Superior Sealing Performance: Dual O-rings made from FKM 90 material provide outstanding sealing, protecting against fluid leakage and ensuring the safety of well operations. Streamlined Installation: Designed for efficiency, the IRC's installation process reduces operational downtime, enhancing productivity and operational flow. Marlin Oil Tools is dedicated to providing the oil and gas industry with innovative solutions like the IRC (Internal Roll-on Connector), designed to meet the rigorous demands of well intervention operations. Contact us today to discover how our advanced coiled tubing tools can optimize your operational efficiency and success.

Unleash Unprecedented Power with the Kessels MS-102 Multistage Steam Turbine: The Apex of Efficiency and Reliability In the oil and gas industry, where power and precision are non-negotiable, Kessels Steam Turbines proudly presents the MS-102 Multistage Steam Turbine – a true marvel of engineering designed to redefine excellence in the world of steam turbines. Mastering Back-Pressure Turbines Back pressure turbines have long been the cornerstone of industrial steam applications, and our MS-102 Multistage Steam Turbine takes their capabilities to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines are the linchpin between boiler units and process steam headers, revolutionizing steam utilization and power generation. Efficiency Beyond Compare At the heart of the MS-102 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning perfectly with process demands. Every unit of electrical power generated is consumed precisely as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-102 turbine is not merely a machine; it's a versatile powerhouse ready to excel in an array of applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-102 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature is invaluable when low-volume steam demands and high tolerance for pressure variations are essential. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-102 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the most demanding environments. Unparalleled Versatility: Adapt effortlessly to changing needs, be it for drive applications or eco-friendly power generation, knowing that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-102 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Geotechnical drilling is a method of investigating subsurface soils to provide data for engineering design prior to construction of buildings, dams, roadways and other infrastructure sites. The low impact and maneuverability of the geotechnical drilling rigs allow for free movement on geotechnical investigation sites with limited access, such as next to foundations, inside buildings, or under power lines. Use the centerline head side shift on our geotechnical drill rigs to simplify traditional geotech techniques such as: Augering Mud rotary SPT Shelby tubes Hard rock cores CPT

Empower Your Mobile Security with ALCiT's Wandera Partnership In today's digital landscape, where threats are omnipresent, your mobile devices stand as gateways to your digital world. With 87% of successful mobile phishing attacks originating outside of emails, and 57% of organizations having fallen victim to mobile phishing incidents, the need for fortified mobile threat defense is undeniable. That's where ALCiT's partnership with Wandera steps in. Wandera: Your Guardian in Mobile Security Amidst the ever-evolving threat landscape, Wandera emerges as a beacon of mobile security. With cutting-edge intelligence at its core, Wandera's threat defense stands as a formidable fortress against threats targeting your mobile devices. ALCiT proudly joins forces with Wandera to ensure your mobile landscape is fortified and resilient. Wandera's Armor: Unveiled Phishing Protection: 87% of successful mobile phishing attacks occur beyond emails, but with Wandera, you're secured. Experience comprehensive protection against phishing attempts that threaten your mobile domain. Malware Defense: Mobile malware knows no bounds, but neither does Wandera's prowess. Shield your devices from mobile malware, safeguarding your digital space. Cost Control and Reduction: Wandera isn't just a security guardian; it's a cost-effective ally. Control and reduce costs across your mobile fleet, ensuring both security and efficiency. Preserve Your Reputation: In today's digital age, reputation is paramount. Wandera shields your company's reputation by preventing mobile threats that could compromise your integrity. Unlock a Secure Mobile Future With ALCiT's partnership with Wandera, the power to safeguard your mobile realm is within your grasp. Embrace the future of mobile security – one that's fortified, intelligent, and responsive to threats. Secure Your Mobile Domain Today ALCiT's partnership with Wandera isn't just a collaboration; it's your shield against mobile threats.

Crew Transport buses for long term charter in locations around the world where reliable transportation is critical. Getting the crew to and from the job site in safety and comfort is key to a good start and end to the workday. Custom crew bus solutions available and every project is unique so please contact us to work together to find an optimum solution on crew transport.

BOOM AND STICKS 5.7 m (18'8") Reach boom CAB Rollover protective structure (ROPS) Mechanical-suspension seat High-resolution 203 mm (8 inch) LCD touchscreen monitor CAT TECHNOLOGY Cat Product Link™ Remote Flash Remote Troubleshoot Auto hammer stop ELECTRICAL Two 1,000 CCA maintenance-free batteries Programmable time-delay LED working lights LED chassis light, left-hand/right-hand boom lights, cab lights ENGINE Cat C4.4 single turbo engine Two selectable power modes Auto engine speed control Auto engine idle shutdown 52° C (125° F) high-ambient cooling capacity -32° C (-25° F) cold start capability Double element air filter with integrated pre-cleaner Reversible electric cooling fans HYDRAULIC SYSTEM Boom and stick regeneration circuits Boom and stick lowering check valves Auto warm up Auto two-speed travel Boom and stick drift reduction valve Slider joysticks Tool control (two pumps, one/two way high-pressure flow) SAFETY AND SECURITY Rearview and right-hand-sideview cameras Ground-level engine shutoff switch Right-hand handrail and hand hold Signaling/warning horn SERVICE AND MAINTENANCE Sampling ports for Scheduled Oil Sampling (S·O·S) Ground-level and platform-level engine oil dipsticks UNDERCARRIAGE AND STRUCTURES Tie-down points on base frame 3700 kg (8,160 lb) counterweight (Turkey only) 4200 kg (9,300 lb) counterweight

Introducing the revolutionary slim design composite plug from ID OILTOOLS – the "Long Range" Composite Frac Plug! With its advanced engineering, this plug is designed to pass through damaged casing, restricted internal casing diameters, and existing casing patches in the wellbore. Now, you can get more from every investment with this cost-effective option for both vertical and horizontal wells. The "Long Range" plug features a unique pump-down element design that requires less fluid and pump pressure to deploy the plug horizontally. It is made with better materials for better results, incorporating composite material and aluminum construction. This makes it possible for wells previously marked for abandonment to be re-completed, increasing overall production and profitability. Our composite frac plug can be configured as a Ball Drop or Bridge Plug, and it can be deployed on wireline or coiled tubing. Its dependable cast iron slips secure the plug in place, and the positive lock-up feature ensures lock-up of multiple plugs in a single wellbore. Plus, custom O.D. is available upon request. Don't miss out on this patented technology that has already proven its success. Choose ID OILTOOLS for the Long Range Composite Frac Plug and experience the next level of downhole solutions.

Enhancing Well Performance Insights with InWaTec Combined’s Memory Gauge Services At InWaTec Combined, we recognize that the quest for efficiency within the oil and gas sector hinges on the precision of data collected from the depths of the earth. This is precisely why we offer top-tier Pressure and Temperature Memory Gauge Services—a tool crucial for optimizing well productivity and ensuring operational integrity. Our electronic Memory Gauges are engineered to withstand the rigorous conditions of the downhole environment, providing accurate records of pressure and temperature. These robust instruments are the sentinels of the wellbore, vigilantly recording data that is vital for the evaluation of well performance and reservoir behavior. The utilization of Memory Gauges is central to gauging bottomhole pressures and temperatures across varying production rates. This data is instrumental in conducting build-up and drawdown tests, which are essential for assessing well productivity. With the insights garnered from these tests, operators can make informed decisions about stimulation, enhancement, and management of their well systems. InWaTec Combined’s Memory Gauges are not just instruments; they are the bearers of information that can significantly impact the economics of well operations. By accurately capturing downhole conditions, our gauges assist in pinpointing production issues, facilitating timely interventions that can forestall costly downtime and mitigate potential hazards. Our commitment at InWaTec Combined is to provide our clients with not just data, but solutions that translate into cost savings, increased safety, and environmental protection. Investing in our Memory Gauge Services means investing in the longevity and prosperity of your wells. Let us partner with you to harness the full potential of your reservoirs with precision, reliability, and expertise that you can trust.